Masterflex I/P series EASY-LOAD pump head77601-00 77602-10

Masterflex I/P series EASY-LOAD pump head77601-00 77602-10

---Quickly and conveniently replace pump tubing - in just a few seconds

• Compatible with multiple sizes of pump tubing for more flexible use

Pump tube automatic positioning, no need for operator adjustment, easy to install

Quickly replace pump tubing to shorten downtime

ATEX Zone 2 certified model 77601-80; Achieve EEx II 3 G c II C T6 level

An eccentric wheel is connected to the pump tube automatic locator inside the Easy Load pump head, and the housing is sturdy and resistant to chemical corrosion. Through this design, the pump tube can be quickly and conveniently replaced without the need to remove the pump head from the driver. The built-in pump tube guide device ensures that the pump tube is installed in the optimal position, thereby exerting the best performance and maximizing the service life of the pump tube. The spring pump tube retainer automatically ensures the safe fixation of the pump tube, extends the service life of the pump tube, and ensures that all sizes of pump tubes can perform at their best. By adjusting the degree of bite compression, the maximum pressure or longest service life can be achieved.

PSF casing, CRS or SS rotor, PPS casing, SS rotor pump head optional. PSF is more economical, while PPS has better chemical resistance. SS rotor * PTFE sealed bearing, with the advantages of long service life and low maintenance; The CRS rotor is equipped with Buna N wrapped bearings.

Two pump heads can be installed on the same driver using a dual channel component. Please refer to the ordering information below.

Random equipment: single channel installation components, spare handle foot covers, can be used to reduce operating noise and extend working life.

Parameters and ordering information

† PSF=polysulfone PPS=polyphenylene sulfide CRS=cold-rolled steel SS=stainless steel

77601-95 spare single pump head installation component, made of stainless steel material

77601-96 is a dual channel installation component used for stacking dual pump heads, made of stainless steel material

77600-03 spare handle foot cover. 10 pieces/pack.