Electrostatic precipitatorDetailed description: QuietElectrostatic precipitatorThe working principle of is to use a high-voltage electric field to ionize the flue gas, and the dust in the airflow is charged and separated from the airflow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates with different geometric shapes, called a dust collecting electrode.

Manufacturer of electrostatic precipitatorThe performance is affected by three factors: dust properties, equipment structure, and flue gas flow rate. The specific resistance of dust is an indicator for evaluating conductivity, which has a direct impact on dust removal efficiency. If the specific resistance is too high, the dust particles that reach the dust collection electrode are not easily discharged, and a voltage gradient is formed between the dust layers, which can cause local breakdown and discharge phenomena.

These situations will cause a decrease in dust removal efficiency. The specific resistance is too low, making it difficult for dust particles to remain on the dust collection electrode, resulting in their return to the airflow.

1. DomesticThe overall new RS corona wire:

High length up to 15 meters, with low corona voltage, high corona current density, and strong rigidity,Damaged, with high temperature resistance and heat resistance, combined with top vibration cleaning effect.

According to the dust concentration, configure the corresponding corona wire density to adapt to high dust concentration dust collection, with a high allowable inlet concentration of up to 1000g/Nm3.

2. Strong vibration at the top of the corona electrode:

According to the dust cleaning theory, the top placed electrode can be subjected to strong vibration using either mechanical or electromagnetic methods.

3.Wide spacing and special configuration of electrode plates:

By making the electric field strength and plate current distribution more uniform, the driving speed can be increased by 1.3 times, and the specific resistance range of captured dust can be expanded to 101-1014 Ω - cm, which is particularly suitable for high specific resistance dust recovery from waste gases such as sulfide bed boilers, new cement dry rotary kilns, grate coolers, sintering machines, etc., to slow down or eliminate the phenomenon of back corona.

4. Increase the vibration acceleration and improve the dust cleaning effect:

dust collector

6. Small footprint and light weight:

Due to the use of top vibration design in the discharge electrode system, and the innovative use of asymmetric suspension design for each electric field, which breaks with convention, and utilizesThe optimization design of the computer software for the shell of the environmental equipment company has reduced the overall length of the electrostatic precipitator by 3-5 meters and the weight by 15% under the same total dust collection area.

7. Match L-C high system:

High voltage control can be controlled by DSC system and operated by upper computer, while low voltage control can be controlled by PLC and operated by Chinese touch screen. It has superior functions such as high dust removal efficiency, overcoming high specific resistance, and handling high concentrations.

8. High guarantee insulation system:

To prevent the high-voltage insulation material of the electrostatic precipitator from condensing and crawling, the shell adopts a double-layer inflatable roof design with heat storage, the electric heating adopts new PTC and PTS materials, and the bottom of the insulation sleeve adopts a hyperbolic back blowing cleaning design,Ceramic bushing is prone to malfunction due to condensation and creepage, and maintenance, upkeep, and replacement are extremely convenient.