Product Introduction

Manufacturer of asphalt nucleated density meterThe non nuclear asphalt pavement density tester can quickly measure, with accurate, stable and reliable results. Adopting non nuclear technology, low cost, and high safety. Simultaneous measurement of density and surface temperature, as well as relative moisture content. Calibration is simple, with high accuracy and good repeatability. It is currently the most advanced asphalt density testing instrument in the world.

Manufacturer of asphalt nucleated density meterPerformance characteristics:

1. Quickly and accurately measure the density of hot mix asphalt concrete pavement.
2. Adopting nuclear free technology means exemption from licensing, service fees, or security considerations.
Data can be accurately read in 3.3 seconds.
4. Measure and display the relevant road surface temperature and humidity.

5. It can synchronously display GPS positioning information (latitude and longitude) of instrument measurement points (optional).

Technical parameters:
1、 Measurement range
1. Detection area: within a diameter range of 27cm, it is allowed to measure both fine and rough materials

Operating temperature: ambient temperature -7 ℃ to 43 ℃, surface temperature -175 ℃, storage temperature -18 ℃ to 66 ℃

Detection depth: 25mm to 100mm
4 units of measurement: inches or mm, lb/cu ft or kg/cum
5 display measurement items: density,% compaction degree,% k porosity, and segregation variables
6 built-in measurement and calibration functions, accurate results can be obtained under various temperature and humidity conditions

2、 Instrument parameters
1. Display screen: 5.0-inch high-definition display screen; Display interface: Chinese and English display

2. Data storage: up to 4000 test data

3. Sensor temperature range: 0 to 350 ° C; battery can be used continuously for 24 hours

FUNCTION

Main interface of onboard software

CONTINUE

Test block calibration