Magnum Spill Buster is an automated groundwater oil pollution extraction system that is widely used, convenient, and reliable in soil remediation.

It is designed to extract non-aqueous phase liquid (NAPL) petroleum products from the water surface through wells with a diameter of 5.08cm or larger. Unique automatic search equipment

Ensure that the extraction port of the pump always follows the oil-water interface, so as not to extract groundwater. This is very useful in areas where the oil-water interface frequently changes.

Standard configuration of the system: control box, probe with 15.24m cable, automatic searcher with 7.62m cable, recycling pool full with 7.62m cable

Sensor and 30.48m non-aqueous phase liquid (NAPL) discharge pipe.

The probe includes a small but 12VDC pump and an interface sensor. This sensor is suitable for use in the field, sturdy, integral, and non-contact. cause

So the non-contact form does not produce corrosion, thus avoiding similar problems commonly found in other types of sensors, such as conductive, floating, and optical sensors

Even radio frequency methods.

The control box controls and displays the system, can change system parameters, and interfaces with optional software and equipment.

The automatic searcher is an electric drum installed at the wellhead, which automatically lifts and lowers the probe along with the oil-water interface; Wrap the cable to prevent it from getting tangled; Just make some adjustments

Used with LNAPLs (recovering upper substances) or DNAPLs (recovering lower substances); The pumping device can be installed on the searcher.

Basic technical parameters

power supply： 230VAC 100W, or optional battery cable and 24VDC battery, The maximum power is 75 watts

operate temperature-40 to 60 ° C

Viscosity range:

Standard pump: -0 to 10CP

Optional medium viscosity pump: up to 25CP

Pump speed:When 0PSI (zero depth without reflux pressure), it reaches 45GPH (175LPH);

15GPH (57LPH) at 50PSI (50 'depth, 25PSI reflux pressure)

Standard well depth:Zui Da 15.24m

Zui Big Well Depth:30.48m (optional 30.48m deep well cable)

The largest small well space for placing automatic search engines： 60.96cm X 60.96cm X 55.88cm (depth)

Probe size:4.83cm diameter X 40.64cm long

The cable diameter with discharge pipe is 1.27cm, and the standard probe cable length is 15.24m

Control box size： 33.02cm wide x 48.26cm high x 15.24cm deep

An additional 25.4cm at the bottom is required for cable export, and 35.56cm at the front and left sides are needed for door opening

Standard cable length:7.62m control box to wellhead

NAPLRecycling pool probe： 5.08cm standard barrel cap nut, standard cable length 7.62m

Total weight:About 31 kilograms

Optional equipment：

·Using a rapid response box installed in the field

·Extension cable from control box to wellhead

·Complete solar charging system (24VDC)

·Backup pump, battery cable

·Pumping control module

·Grundfos pump with NEC accessories, 5-40GPM

·Network software for central PC - capable of simultaneously controlling up to 32 sets of Magnum Spill Busters systems

·RS-485 repeater for long-distance connection between wells

·Computer software for temporary control in the field

There are two other models to choose from:

Spill Buddy Pro SystemExcluding automatic search engine, recycling tank full sensor, including oil-water interface and oil level sensor, rechargeable battery

And wall mounted chargers.

Spill Buddy SystemExcluding automatic search engine, recycling pool full sensor, including oil-water interface sensor, rechargeable battery, and wall mounted charger

an electric appliance.