model

LH71-1

LH71-2

LH71-3

Display specifications

7-digit and negative sign display, amber color

Acceptable ruler

Direct connection: GB-ER, SJ300, SJ700A, PL20C. Additional adapter required: DG-B

display resolution

Standard 0.1 μ m, 0.5 μ m, 1 μ m, 5 μ m, 10 μ m, 1 second, 10 seconds, 1 minute, 10 minutes

open: 100 μ m, 50 μ m, 25 μ m, 20 μ m, 2 μ m, 0.05 μ m and 1 degree can be increased.

Input resolution

Measurement unit input resolution or higher and diameter display (except for angle display)

Input signal

A/B/Z phase number (compliant with EIA-422)

Minimum input difference

100ns

Error Warning

Unmeasured/Over speed/Exceeding maximum display value/Power off/Data saving error

Return to zero

Reset to zero with the button

Preset

Three sets of numerical values can be preset for storage.

Origin detection

Can detect the origin and reproduce the reference point (requires a ruler with the origin)

Data storage

Even if the power is cut off, the displayed values and preset values can still be memorized.

Linear error and compensation

Linear compensation can be performed on the digital display, with a correction amount of standard ± 600 μ m/m (up to ± 1000 μ m/m)

Interval error compensation

When using a ruler with an origin, it is possible to divide the range of movement into 3 and 2 intervals and make corrections one by one. The correction value is ± 600 μ m/m (LH70 does not have this function)

zoom

Zoom ratio: 0.100000 to 9.999999 (only suitable for LH71)

Programmable

Programmable functionality (up to 850 programs)

1. Manual key input

2. Guiding input by actual machine movement

3. Mirror programming can be performed during program execution

4. Capable of "arbitrary angle segmentation", "simple arc machining", and "line hole" functions

Angle display

Paired with a steel tape ruler installed on a curved surface, the angle can be displayed after inputting the diameter and resolution.

dormancy

When not in operation for a certain period of time, it will automatically shut down (time can be set)

Power supply

DC 12V rated 0.75A maximum. 1A AC 100V ± 10% when using AC power supply PSC-22 (only applicable to US) or PSC-23 (applicable to Europe and other countries)

Power consumption

The maximum 32VA is connected to the AC power supply.

Operating temperature range

0-40 ℃ (no condensation)

Storage temperature range

-20~+60 ℃ (no condensation)

weight

Approximately 1.5 kilograms