20 turn angular displacement encoder angle sensor parameters:

1. Supply voltage 24V, 12V

2. Output: 0-10k, 0-5V, 0-10V, 4-20mA

3. Independent linear tolerance: Precision grade ± 0.2%

4. Power: 2.0W

5. Electrical stroke: 360 °× n ± 5 ° (n=20 turns)

6. Mechanical stroke: 360 ° × n 0 ° -10 ° (n=20 turns)

7. Insulation resistance:>1000M Ω (500V. D.C)

8. Dielectric voltage: 1min (1000V. A.C)

9. Material: Shaft stainless steel

10. Shell: Aluminum alloy

11. Terminal: waterproof connector outlet

A 20 turn angle encoder refers to a sensor that can sense the measured angle and convert it into a usable output signal. The rotation direction of the axis determines the angle. When it rotates in one direction, the count increases, and when it rotates in the opposite direction, the count decreases. The counting is related to the initial position of the angle encoder. When initializing the angle sensor, its count value is set to 0. If necessary, you can reset it using programming. By calculating the angle of rotation, it is easy to determine the position and velocity.