ML4206 series 10 turn angle encoder

A 10 turn angle encoder refers to a sensor that can sense the measured angle and convert it into a usable output signal. The rotation direction of the axis determines the angle. When it rotates in one direction, the count increases, and when it rotates in the opposite direction, the count decreases. The counting is related to the initial position of the angle encoder. When initializing the angle sensor, its count value is set to 0. If necessary, you can reset it using programming. By calculating the angle of rotation, it is easy to determine the position and velocity.

10 circle angular displacement encoder angle sensor parameters：

1. Output signal: 0-5K Ω; 0-10K Ω; 0-5V; 0-10V; 4-20 mA

2. Measure angles 0-90 and 0-180 degrees

3. Resolution: infinitesimal

4. Power: 2.0W

5、 信噪： ＜ 100ΩE. N.R

6. Electrical stroke: 360 °× n ± 5 ° (n turns)

7. Mechanical stroke: 360 ° × n 0 ° -10 ° (n turns)

8. Insulation resistance:>1000M Ω (500V. D.C)

9. Dielectric voltage: 1min (1000V. A.C)

10. Supply voltage: 10-24VDC

11. Material: Shaft stainless steel

12. Shell: Aluminum alloy

13. Terminal: aviation socket or waterproof connector outlet