VIP member
Lithium battery high-temperature aging room
Lithium battery high-temperature aging room
Product details
Structural characteristics of high-temperature aging room for lithium batteries
The house is assembled with double-sided color steel plates and specialized aluminum alloy profiles, with five/six sided insulation.
Multiple insulation materials to choose from
Test a set of doors (single or double open→); Designated by the customer.
Equipped with a glass observation window with a size of 35cm× 60cm(W×H)。
lithium batteryaging roomcontrol system
Adopting the UNQUE/Korean ternary series controller imported from Japan.
It can directly display the temperature curve.
The control mode is PID (proportional integral derivative) automatic calculation. PID control is simple and easy to understand, and does not require precise system models or other prerequisites for use.
The temperature sensor adopts DIN PT-100Ω (Platinum induction).
Heating system
Adopting high-efficiency armored stainless steel electric heating tubes imported from Japan.
The heating system adopts hot air circulation heating method, with uniform temperature distribution, completely independent system, and does not affect the control circuit.
The temperature control output power is calculated by a microcomputer, and the heating power is automatically controlled according to the size of the internal load to achieve high-precision and high-efficiency electricity efficiency, which is more environmentally friendly and energy-saving.
Exhaust system
A set of exhaust system.
Meet the temperature balance when the aging room test product generates excessive heat.
When the aging indoor temperature exceeds the limit, the exhaust system is turned on to achieve the effect of balancing the indoor temperature.
Compliant with standards
GB/T2423.2-2008, GB50054-95, GB5002S2-95, GB50169-92, GB50243-2002, etc
Equipment model |
EWR-10P-A |
EWR-30P-A |
EWR-75P-A |
EWR-100P-A |
Working Size |
2000x2000x2500 |
3000x4000x2500 |
5000x6000x2500 |
5500x7500x2500 |
Note: Customization can be made according to customer requirements for size and temperature control range to meet their needs. | ||||
temperature range |
RT+10～55℃、65℃selectable |
|||
Internal material |
Galvanized color steel plate or SUS # 304 stainless steel plate |
|||
External material |
Galvanized color steel plate or SECC high and low temperature resistant steel plate+powder coating paint |
|||
Thermal insulation material |
Polyurethane, rock wool (selected according to different temperatures) |
|||
Insulation thickness |
50mm； 75mm ； 100mm |
|||
Analysis accuracy |
0.1 ℃ or 0.01 ℃ |
|||
Control accuracy |
±1℃ |
|||
Temperature deviation |
±3℃ |
|||
fluctuation |
±2℃ |
|||
Heating time |
Average 1-5 ℃/min |
|||
Cooling time |
10~60 minutes |
|||
Series noise |
≤ 65 decibels |
|||
control system |
Programmable: LCD color LCD controller or standard: LED digital controller |
|||
heating system |
Specially designed high-speed electric heater |
|||
circulatory system |
Specially designed low-noise, multi wing circulating air system |
|||
Safety device |
Leakage and power-off protection, load protection, over temperature protection, fan overheating protection, sound and light alarm, etc |
|||
Other accessories |
Glass observation window, test hole, smoke alarm, indoor lighting, temperature recorder (optional) |
|||
System power supply |
AC 380(±10%)V，50HZ± 0.5HZ， Three phase four wire+protective earth wire |
|||
Meet the standards |
Meet the standard GB/T2423.3 "Environmental Testing for Electrical and Electronic Products - Ca: High Temperature Test Method" |
|||
National Free Technical Service Hotline: | ||||
Partial cases: | ||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-