VIP member
Large solvent recovery machine, acetone and trichloromethane recovery equipment, explosion-proof recovery machine for petroleum thinner
Suitable for alcohol (methanol), alcohol (ethanol), isopropanol (IPA), acetone, butanone (MEK), 2-hexanone, 3-hexanone, cyclohexanone, hexane, toluene
Product details
1、 Range of multifunctional solvent recovery machine:
Suitable for alcohol (methanol)Alcohol (ethanol), isopropanol(IPA) 、 Acetone, butanone (MEK), 2-hexanone, 3-hexanone, cyclohexanone, n-hexanone, toluene, xylene, ethyl acetate, propyl acetate, butyl acetate, isopropyl acetate, gun wash water, white oil, anti white water, Tianna water (Tianna water), trichloroethane, tetrachloroethylene, trichloroethylene, tetrachloroethylene, screen wash water, mold wash water, mold wash water, thinner, diluent, etc.
2、 Features of multifunctional solvent recovery machine:
1Large recycling capacity, occupying an area, equipped with explosion-proof, automatic control, and energy-saving equipment with high recycling efficiency.
2This device adopts an external heating natural circulation evaporation method, which has a fast evaporation speed, and the liquid material runs in a fully sealed device without pollution. Easy to clean, simply open the upper and lower covers of the heater. The equipment is made of stainless steel at the contact points with the liquid materialSUS304manufacture.
3、 Main technical parameters:
1Before driving, clean all parts of the heater with hot water and check if each part and pipe screw are tightly closed.
2When the liquid reaches the lower mirror of the evaporator, open the feeding valve1/2Close the feed valve to open the steam valve of the heater. The steam valve should gradually open to increase the cooling water flow rate and pay attention to boiling to avoid the material liquid being carried out of the evaporator with the secondary steam, causing losses.
3Steam pressure, generally used0.05~0.09MPa(gauge pressure)The purpose is to prevent excessive steam pressure from causing coking of thermosensitive materials.
4Boiling point of materials and tank: The general operating temperature is60~70Between ℃.
5Discharge: When the material is recovered to a certain proportion, close the steam valve and the cooling water to start discharging.
6Cleaning: After use, enter tap water and then open the steam valve for cleaning. For future use and to ensure good hygiene conditions.
Production physical picture:
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-