Large gantry boring and milling machine manufacturerLet me tell you these operating procedures:

1. The workpiece should be clamped with pressure plates, screws, or specialized tools. Do not add a sleeve with a regular wrench to avoid slipping and injuring people.

2. The cutting tool must be firmly clamped, otherwise it is not allowed to work while driving.

Before starting work, it is necessary to check the operation of the transmission part of the machine tool and install the baffle of the machine tool before it can operate.

4. When milling various workpieces, especially during rough milling, slow cutting should be performed at the beginning.

When moving the workbench and tool holder, the fixing screws should be loosened first.

When loading and unloading cutting tools, a copper hammer or wooden mallet should be used to lightly strike to prevent tool fragments from flying out and injuring people.

7. During cutting, it is not allowed to change speed or adjust the tool, and it is forbidden to touch or measure the workpiece with hands.