Lange Laboratory Electrospinning Injection Pump LSP02-2B

LSP02-2B is mainly used in laboratories, with excellent electromagnetic compatibility performance and ESD ≥ IV level (IEC 61000-4-2). It is widely used in chemical reaction injection experiments, electrospinning experiments, and other laboratory microinjection experiments.

Flow range: 0.001 μ l-86.699ml/minNumber of large channels: 2

Applicable locations:

Mainly used in the laboratory

Lange Laboratory Electrospinning Injection Pump LSP02-2B

Product Features

LSP02-2B laboratory infusion pump is a dual channel infusion/extraction pump mainly used in laboratories. It has an integrated structure, excellent electromagnetic compatibility performance, and ESD ≥ IV level (IEC 61000-4-2). Multiple working modes enable it to adapt to the needs of various applications in different fields. It has very high control accuracy and a wide range of linear velocities, making it an ideal high-precision, low flow, and low pulsation liquid transmission equipment; LSP02-2B injection pump is widely used in chemical reaction injection experiments, electrospinning, long-term animal drug injection experiments, and other laboratory microinjection experiments

Features:

Human computer interface friendly: large screen LCD display, digital knob combined with thin film buttons for easy and fast operation
Power off memory function: 1. EEPROM saves set parameters, and there is no need to reset them after powering on again. 2. When running in traffic mode, the power is cut off. After power is restored, it can continue to run or stop according to the set parameters
The 485 communication bus can be connected to the upper computer and controlled through backend software.
Liquid volume calibration function: By using the calibration program, a more accurate flow rate can be obtained
Working mode: injection, extraction, injection before extraction, extraction before injection, continuous
Large stroke: 140mm
Linear velocity range: 5 μ m/min-130mm/min (flow rate=linear velocity x cross-sectional area inside the syringe)
Travel control accuracy: Error ≤± 0.5% (when the travel is ≥ 30% of the large travel)
Syringe selection: Main manufacturers and models of syringes are available for selection
Flow correction: Obtain more accurate results through a correction programThe liquid volume
Display parameter selection: liquid volume, flow rate, or linear velocity
Status signal output: 2-channel OC gate signal output, used to indicate start/stop and direction status
Communication interface: RS485
Weight: 4.3kg
Working environment temperature: 0 ℃ -40 ℃
Relative humidity of working environment: ＜ 80%