VIP member
LGD-PCT-40 High Voltage Accelerated Aging Test Chamber
1. Product features: 1. Adopting an imported high-temperature resistant solenoid valve dual circuit structure, it minimizes the use failure rate to th
Product details
1.Product features:
1. Adopting an imported high-temperature resistant solenoid valve dual circuit structure, the failure rate is minimized to the greatest extent possible.
2. Independent steam generation chamber to avoid direct steam impact on the product and prevent local damage to the product.
3. The labor-saving structure of the door lock solves the problem of difficult locking of the first generation product's disc handle.
4. Test the front row cold air; The design of discharging cold air during the experiment (discharging air from the test bucket) improves pressure stability and reproducibility
5. Long term experimental operation time, with the experimental machine running for 1000 hours
6. Water level protection, detected by the water level sensor in the laboratory
7. Tank pressure resistance design, the box body can withstand pressure (140 ℃) of 2.65kg, which meets the water pressure test of 6kg
8. Two stage pressure safety protection device, using a combination of two-stage controller and mechanical pressure protection device
9. Safety protection pressure relief button, emergency safety device two-stage automatic pressure relief button
10. Full touch controller, supports exporting history from USB flash drive
1. Performance
1.1 Set temperature:+100 ℃~+132 ℃ (saturated vapor temperature)
1.2 Humidity range: 100% steam humidity
1.3 Humidity control stability: ± 1% RH
1.4 Use pressure: 1.2~2.89kg (including 1atm)
1.5 Time Range: 0 Hr ～ 9999 Hr
1.6 Pressurization time: 0.00 Kg to 1.04 Kg/cm2 for approximately 45 minutes
1.7 Temperature fluctuation uniformity: ±0.5℃
1.8 Temperature display accuracy: 0.1 ℃
1.9 Uniformity of Pressure Fluctuations: ±0.02Kg
2.0 Humidity Distribution Uniformity: ± 5% RH
2.Test box material:
2.1 Test box size: PCT-40（400 mm x L500 mm）, Circular test box
2.2 Overall dimensions: 900x 900 x 1600 mm (W * D * H)
2.3 Inner bucket material: stainless steel plate material (SUS # 316 3mm) or spray coating
2.4 Outer bucket material: stainless steel plate material
2.5 Insulation material: Rock wool and hard polyurethane foam insulation
2.6 Steam generator heating tube: titanium tube heating.
2.7 Control System:
a. Using a touch controller to control the test temperature, time, information query, and data export
b. Use a pointer to display the pressure gauge
c. Microcomputer P.I.D automatic calculation and control of saturated vapor temperature
d. Manual water inlet valve (automatic water replenishment function, can be tested continuously without stopping the machine) Search.
2.8 Mechanical Structure:
a. Circular inner box, stainless steel circular test inner box structure, in compliance with industrial safety container standards, designed to prevent condensation and dripping during testing
b. Circular lining, stainless steel circular lining design, can avoid direct impact of steam latent heat on the test sample
c. Precise design, good air tightness, low water consumption, and can operate continuously for 400 hours each time water is added
d. The patented packing design tightly integrates the door with the box, which is completely different from the traditional extrusion type and can extend the packing life
e. The critical point limit method automatically provides safety protection, and the abnormal cause and fault indicator light are displayed
2.9 Security Protection:
a. Imported high-temperature resistant sealed solenoid valve adopts a dual circuit structure to ensure no pressure leakage.
b. The whole machine is equipped with multiple safety protection devices, including overpressure protection, overtemperature protection, one key pressure relief, and manual pressure relief, to ensure maximum safety
User usage and safety.
c. The anti pressure door lock device prevents the test chamber door from opening when there is pressure inside the laboratory
3.Main accessory list:
Thermostat: Touch Control Controller
Test temperature record USB drive export (standard)
Computer online control (optional)
High temperature and high pressure water level gauge: Hongyu, Taiwan
High temperature solenoid valve: Herion from Germany
Relay: Omron from Japan
Pressure gauge: China Red Flag
Overtemperature protector: Korean AGO
S. S.R: Taiwan makes a name for itself
Temperature and humidity sensor: VAISALA, Netherlands
Heater: self-produced (all titanium tube)
Pressure safety device: self-produced (copper spring type)
High pressure clean water pump: (Germany) PUM
Hose: Nissan sterile grade
Box material (inner bucket): SUS316
Outer material of the box: SUS304
Sealing ring: Silicone V-shaped mold opening
4.Other accessory parts
4.1 Test rack 1 set
4.2 Sample Plate
5.Power supply system:
5.1 The fluctuation of system power supply shall not exceed ± 10
5.2 Power Supply: Single phase 220V 20A 50/60Hz
6.Environment&Facilities:
6.1 Allowable working environment temperature: 5 ℃~30 ℃
6.2 Experimental Water: Pure Water or Distilled Water
7.Attached file:
7.1 New System Warranty Certificate, Warranty Certificate
7.2 Operation and Maintenance Manual
1. Adopting an imported high-temperature resistant solenoid valve dual circuit structure, the failure rate is minimized to the greatest extent possible.
2. Independent steam generation chamber to avoid direct steam impact on the product and prevent local damage to the product.
3. The labor-saving structure of the door lock solves the problem of difficult locking of the first generation product's disc handle.
4. Test the front row cold air; The design of discharging cold air during the experiment (discharging air from the test bucket) improves pressure stability and reproducibility
5. Long term experimental operation time, with the experimental machine running for 1000 hours
6. Water level protection, detected by the water level sensor in the laboratory
7. Tank pressure resistance design, the box body can withstand pressure (140 ℃) of 2.65kg, which meets the water pressure test of 6kg
8. Two stage pressure safety protection device, using a combination of two-stage controller and mechanical pressure protection device
9. Safety protection pressure relief button, emergency safety device two-stage automatic pressure relief button
10. Full touch controller, supports exporting history from USB flash drive
1. Performance
1.1 Set temperature:+100 ℃~+132 ℃ (saturated vapor temperature)
1.2 Humidity range: 100% steam humidity
1.3 Humidity control stability: ± 1% RH
1.4 Use pressure: 1.2~2.89kg (including 1atm)
1.5 Time Range: 0 Hr ～ 9999 Hr
1.6 Pressurization time: 0.00 Kg to 1.04 Kg/cm2 for approximately 45 minutes
1.7 Temperature fluctuation uniformity: ±0.5℃
1.8 Temperature display accuracy: 0.1 ℃
1.9 Uniformity of Pressure Fluctuations: ±0.02Kg
2.0 Humidity Distribution Uniformity: ± 5% RH
2.Test box material:
2.1 Test box size: PCT-40（400 mm x L500 mm）, Circular test box
2.2 Overall dimensions: 900x 900 x 1600 mm (W * D * H)
2.3 Inner bucket material: stainless steel plate material (SUS # 316 3mm) or spray coating
2.4 Outer bucket material: stainless steel plate material
2.5 Insulation material: Rock wool and hard polyurethane foam insulation
2.6 Steam generator heating tube: titanium tube heating.
2.7 Control System:
a. Using a touch controller to control the test temperature, time, information query, and data export
b. Use a pointer to display the pressure gauge
c. Microcomputer P.I.D automatic calculation and control of saturated vapor temperature
d. Manual water inlet valve (automatic water replenishment function, can be tested continuously without stopping the machine) Search.
2.8 Mechanical Structure:
a. Circular inner box, stainless steel circular test inner box structure, in compliance with industrial safety container standards, designed to prevent condensation and dripping during testing
b. Circular lining, stainless steel circular lining design, can avoid direct impact of steam latent heat on the test sample
c. Precise design, good air tightness, low water consumption, and can operate continuously for 400 hours each time water is added
d. The patented packing design tightly integrates the door with the box, which is completely different from the traditional extrusion type and can extend the packing life
e. The critical point limit method automatically provides safety protection, and the abnormal cause and fault indicator light are displayed
2.9 Security Protection:
a. Imported high-temperature resistant sealed solenoid valve adopts a dual circuit structure to ensure no pressure leakage.
b. The whole machine is equipped with multiple safety protection devices, including overpressure protection, overtemperature protection, one key pressure relief, and manual pressure relief, to ensure maximum safety
User usage and safety.
c. The anti pressure door lock device prevents the test chamber door from opening when there is pressure inside the laboratory
3.Main accessory list:
Thermostat: Touch Control Controller
Test temperature record USB drive export (standard)
Computer online control (optional)
High temperature and high pressure water level gauge: Hongyu, Taiwan
High temperature solenoid valve: Herion from Germany
Relay: Omron from Japan
Pressure gauge: China Red Flag
Overtemperature protector: Korean AGO
S. S.R: Taiwan makes a name for itself
Temperature and humidity sensor: VAISALA, Netherlands
Heater: self-produced (all titanium tube)
Pressure safety device: self-produced (copper spring type)
High pressure clean water pump: (Germany) PUM
Hose: Nissan sterile grade
Box material (inner bucket): SUS316
Outer material of the box: SUS304
Sealing ring: Silicone V-shaped mold opening
4.Other accessory parts
4.1 Test rack 1 set
4.2 Sample Plate
5.Power supply system:
5.1 The fluctuation of system power supply shall not exceed ± 10
5.2 Power Supply: Single phase 220V 20A 50/60Hz
6.Environment&Facilities:
6.1 Allowable working environment temperature: 5 ℃~30 ℃
6.2 Experimental Water: Pure Water or Distilled Water
7.Attached file:
7.1 New System Warranty Certificate, Warranty Certificate
7.2 Operation and Maintenance Manual
Electrical/Electronic Constant Temperature and Humidity Test Chamber LGD-1000LC Programmable Constant Temperature and Humidity Test Machine LGD-100LC
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-