LDX-302Cleaning agent product usage instructions

Mesh roller plate washing solutionforDry bonding (commonly known as gravure roller for adhesive coating) should be cleaned promptly after daily operation, and if working for 24 hours, it should also be cleaned every 3-5 days. However, using only ethyl acetate for cleaning is a very difficult task to thoroughly clean the adhesive. Trace amounts of adhesive will still remain in the mesh of the plate roller, and repeated accumulation and stacking can cause plate clogging, leading to a decrease in printing quality and a reduction in the lifespan of the plate roller; Once the adhesive inside the mesh hardens, it cannot be dissolved or cleaned.

Working on the rubber roller in a stuck state can cause problems due to insufficient coating amount. For example, quality issues such as poor appearance (bubble formation) and poor adhesive strength. To prevent such problems from happening again, LDX-302 plate washing solution should be used to clean the coating roller in order to obtain the appropriate coating amount.

Operation steps:
1.Use ordinary solvents and cotton cloth to remove the adhesive on the surface of the mesh roller.
2. Use a brush toLDX-302Mesh roller plate washing solutionApply evenly to the mesh rollerOn the surface, wrap with polyethylene film and let it sit for fifteen to thirty minutes(Due to the close relationship between chemical reaction rate and temperature. The reaction accelerates when the temperature is high, and vice versa. Therefore, the storage time for summer applications can be shorter, while it should be longer in winter.).
3. Use a copper brush andOrdinary solvent (orWash with clean wateranilox rollerSurface, until clean, willanilox rollersuperficialSolvent orWipe clean with water, at this momentanilox rollerIt should be as smooth as new.

Notes:

1TheLDX-302It is a compound solution that has a strong corrosive effect on the skin, so plastic gloves should be worn when using it. If this plate wash accidentally splashes on the skin, rinse immediately with clean water.

2TheLDX-302It has a strong corrosive effect, so when using it, avoid contact with paint, metal, etc., especially for cars and other objects, and avoid splashing on them.

3TheLDX-302Please tighten the lid promptly after using the plate washing solution to prevent oxidation, deterioration, and volatilization.

4TheLDX-302Plate washing solution is an organic compound solution that needs to be protected from light and kept away from sources of fire to prevent decomposition or ignition.

5TheLDX-302Please handle the plate washing solution properly after use to avoid causing other losses and environmental pollution.