Integrated temperature and humidity probeIt can be directly installed on the pipeline for pressure measurement, and this installation method can solve the following problems:

1. Can avoid measurement errors caused by adsorption of sampling components
2. No need for sample pretreatment system, completely maintenance free for later use
3. The measurement is based on the moisture content under working conditions, avoiding the possible conversion between gas and liquid phases due to pressure changes, ensuring high accuracy of the measurement results
4. Avoiding the problem of emissions or recycling after sample extraction, the entire analysis process results in no loss of samples
5. The humidity signal and temperature signal are transmitted to the analyzer through a combination of optical fiber and temperature armored cable, and automatic temperature compensation is performed on the impact of temperature changes on the measurement.

Recommended application:

1. Inlet and outlet of various dryers
2. High pressure natural gas transmission pipeline
3. Finished product factory pipeline
4. Direct online measurement of water content in liquid media without sampling
5. Measurement of low moisture content (<10ppm)
6. Trace water analysis of chemicals such as gasoline, diesel, alcohol, ethylene glycol, and fluorocarbons
7. Applications where measuring media is toxic, sampling and analysis are difficult, and phase transitions may occur
8. The value of the tested medium is high, and it is not allowed to discharge it randomly. The medium loss caused by the analysis process is not allowed