VIP member
Kraft 3-ton epoxy adhesive black green group strong crystal metal AB adhesive transparent epoxy resin adhesive
Product Description and Usage: This product is a room temperature curing two-component epoxy adhesive. It not only has a fast curing speed at room tem
Product details
Product Description and Usage:
This product is a room temperature curing two-component epoxy adhesive, which not only has a fast curing speed at room temperature, but also can be completely cured at a temperature of -20 ℃. Due to its high adhesive strength, water resistance, oil resistance, weak alkali resistance, acid resistance, solvent and chemical resistance, and excellent performance, it can be widely used for self-adhesive or mutual bonding of metal and non-metal materials, bonding and repairing of hard materials, bonding of building materials, assembly of automotive parts and electronic components, daily home repairs, factory production and maintenance, bonding of crystals, ceramics, glass, and gemstones. The performance of this product is comparable to that of foreign brands.
Performance indicators:
|
project
|
Component A
|
B component
|
|
appearance
|
Colorless, transparent, and clear liquid
|
Colorless, transparent, and clear liquid
|
|
Viscosity (25 ℃)
|
10000-20000 CPS
|
10000-20000 CPS
|
|
ratio
|
A: B=1:1 (weight)
|
|
|
Gel time (25 ℃)
|
3-5 minutes
|
|
|
3-hour shear strength
|
≥10MPa
|
|
|
24-hour shear strength
|
≥18MPa
|
|
Usage:
Remove oil, rust, clean, and dry the bonding surface. Weigh equal amounts of components A and B, mix them quickly and evenly, and apply them to the treated bonding surface. Immediately stack the workpiece and let it cure for 5-10 minutes. After 3 hours, it can proceed to the next process.
Notes:
1. When adjusting the adhesive, two components should be weighed equally as much as possible, and neither component should be excessive to avoid a decrease in strength and incomplete curing.
2. Mixing should be done quickly and evenly, ideally within 40 seconds to mix the two components and prepare them for immediate use.
3. Components A and B must be tightly covered after use to prevent water absorption and the formation of crystals. If crystals are produced, heat them in a water bath at 40-80 ℃ and wait for them to return to their original state before use.
4. Clean excess glue on hands or adhered objects with alcohol before curing.
5. Strictly prevent children from coming into contact, do not enter!
Storage and transportation:
1. Sealed and stored in a cool and dry place, with a shelf life of up to 24 months.
2. Non flammable and non explosive dangerous goods can be shipped by mail, less than truckload, or express delivery.
Packing Specification:
20g/board (vacuum formed packaging) 15 boards/box 60 boards/piece
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-