Manufacturer of simply supported beam impact testing machineManufacturer of simply supported beam impact testing machine

The simply supported beam impact testing machine is used to determine the impact toughness of non-metallic materials such as hard plastic sheets, pipes, profiled materials, reinforced nylon, fiberglass, ceramics, and cast stone electric edge materials. Convenient, accurate, and aesthetically pleasing. Meets the requirements of GB/T1043 "Impact Test Method for Rigid Plastic Simply Supported Beams" and ISO179, ISO9854-1, DIN8078, DIN53453, etc. Convenient, accurate, and aesthetically pleasing, it is an ideal testing equipment for the chemical industry, research institutions, colleges, and quality inspection departments. The simply supported beam impact testing machine is used to determine the impact toughness of non-metallic materials such as hard plastics, fiber-reinforced composite materials, nylon, fiberglass reinforced plastic, ceramics, cast stones, and plastic electrical edge materials. It is a commonly used equipment for quality inspection in scientific research institutions, colleges and universities, and related factories and mines. There are three display modes: pointer display, LCD screen display, and computer control.

Manufacturer of simply supported beam impact testing machineTest method:

1. Measure the test thickness according to GB6672, take a point at the center of all specimens, and take the arithmetic mean of 10 specimens tested.

2. Select a punch according to the required anti pendulum impact energy for the experiment, so that the reading is between 10% and 90% of the full range

3. Calibrate the instrument according to the usage rules.

4. Flatten the sample and clamp it in the gripper. There should be no wrinkles or excessive tension around the sample. The impact surface of 10 samples should be made *.

5. Hang the pendulum on the release device, press the button on the computer to start the test, and make the pendulum impact the sample. Repeat the same steps for 10 tests, and automatically calculate the arithmetic mean of the 10 samples after the test is completed.

Manufacturer of simply supported beam impact testing machine