Main features of KF-6406S optical digital relay protection tester

☆ Supports four configuration methods: manual configuration, SCL automatic parsing configuration, message monitoring configuration, and read and save configuration, making it convenient to configure the digital tester;

☆ Support configuration of analog small signals;

Support monitoring and analysis of messages in the network, monitoring of digital output waveforms, and calculation of effective values and phases;

☆ Support comparison between SCL parsing/message listening configuration and current configuration content, quickly locate configuration differences, provide coverage configuration function, and quickly complete debugging tasks;

☆ Supports various sampling value anomaly simulations such as sequence deviation, frame loss testing, synchronization testing, quality testing, sequence jump testing, and error value testing;

☆ Complete testing capabilities, capable of testing various types of protective devices and components;

☆ Unique relay characteristic module, including characteristic templates for the vast majority of relay models both domestically and internationally. Simply input the set value to intuitively display the characteristic graphics of the corresponding protective components;

Provide complete display of electrical signals and status variables;

Multiple ways to set analog parameters: input methods such as phase ground, phase phase, sequence component, impedance, etc. can be freely selected and switched;

☆ Unique output signal customization module, which can edit various complex signal output processes according to needs;

Function Introduction

☆ Provide 4 100Mbps fiber optic Ethernet interfaces, which can be used to output sampling value messages that comply with the IEC61850-9-2/9-1 protocol, and can also be used for GOOSE message transmission and reception;

☆ Can output 3 channels of FT3 format sampling value messages that comply with IEC60044-8 specifications;

For the sampling value message, its channel function, number of channels, sampling rate, ASDU number, etc. can be freely set;

For GOOSE messages, the number of channels, transmission interval time, control block information, etc. can be freely configured;

☆ Compatible with traditional analog switch processing, providing 8 analog switch inputs and 4 analog switch outputs, while the input can automatically recognize input signals with potential and idle contacts;

☆ Supports 12 analog small signal outputs;

☆ Supports 12 DC voltage source outputs;

☆ Supports GPS synchronization;

Provide one RJ45 Ethernet port for communication with the upper computer software;

☆ Complete signal indication: Provide IEC61850-9-2/9-1 and GOOSE fiber optic Ethernet interface link and transmission/reception status indication on the front panel, as well as IEC60044-8 fiber optic interface transmission status indication. All hard contact input and output quantities have corresponding status indicator lights on the front panel;

All fiber optic interfaces are ST interfaces, ensuring stable and reliable wiring