Introduction to Jinjiale Dry Mist Treasure Humidifier:

The average particle size of the Dry Mist Treasure humidifier is 7.5 μ, with a minimum humidification capacity of 9.6L/h and a maximum humidification capacity of 13.2L/h (when the air pressure is 0.3MPa). It can accommodate up to 4 nozzles and is easy to install. The high-quality Dry Mist Treasure brings you silky feel ultra dry mist particles. It is most suitable for humidification in small spaces and will not wet the walls.




Technical parameters of Jinjiale dry mist humidifier（For mobile access, please click here）：

Dry Mist Treasure Model	When the air pressure is 0.3MPa		Number of nozzles
	Spray volume/hr	Gas consumption/min
GWB-1(03)	2.4	29	1
GWB-2(03)	4.8	58	2
GWB-3(03)	7.2	87	3
GWB-4(03)	9.6	116	4

Most suitable for humidifying in narrow spaces without humidifying walls

Dry Mist Treasure Model	When the air pressure is 0.3MPa		Number of nozzles
	Spray volume/hr	Gas consumption/min
GWB-1(03C)	3.3	29	1
GWB-2(03C)	6.6	58	2
GWB-3(03C)	9.9	87	3
GWB-4(03C)	13.2	116	4

Please use it at an unobstructed place 2m above the ground and within 4m in front of the spray. Please use it within the range of 0.3-0.35MPa air pressure. The amount of 0.3-0.35MPa spray remains unchanged, which is most suitable for mass humidification in a large space






Features of Jinjiale Dry Mist Treasure Humidifier:

The world's smallest, high-performance humidifier.
　　
Quick disassembly and easy maintenance.
　　
● High quality spray with spray head spraying distance of more than 4M, with remarkable humidification effect.
　　
● Use ultra small water storage tanks that are difficult for bacteria to reproduce.
　　
● Adopting high-precision machining and non clogging nozzle.
　　
● Automatic control through timer intermittent spray and humidity sensor controller.
　　
If equipped with a pure water processor, there is no need to clean the humidifier.




Introduction to Jinjiale Aerosol Humidifier:

Two stage atomization produces fine droplets, effectively preventing blockage: In the two-stage atomization system, the air-water mixture is sprayed from the central hole to achieve the first atomization; Then mix with the gas coming out from the nearby nozzle to achieve a second atomization.





Jinjiale Aerosol Treasure Technical Parameters（For mobile access, please click here）：

Four nozzle parameters for the entire tank under different air pressures (1 #: 0.4mm commonly used; 2#0.6mm; 3#0.8mm）
air pressure	Whole tank gas consumption (m ³/min)	Droplet size (μ m)			Spray volume (L/H)			Spray distance (m)			Applicable area (m ³)
		Aerosol Treasure 1#	Aerosol Treasure 2#	Aerosol Treasure 3#	Aerosol Treasure 1#	Aerosol Treasure 2#	Aerosol Treasure 3#	Aerosol Treasure 1#	Aerosol Treasure 2#	Aerosol Treasure 3	Aerosol Treasure 1#	Aerosol Treasure 2#	Aerosol Treasure 3
2bar	≥0.15	8.8	20	100	11	13	15	8-15			100-200
3bar	≥0.20	7.6	15	80	12	15	18
4bar	≥0.30	5.0	9.7	60	13	17	21

High quality spray particles: 7.6-11.6 μ m, standard water pressure: 1-1.5bar, standard air pressure: 3-3.5bar





Product accessories:





Product application industry:





Performance characteristics of Dry Mist Treasure and Aerosol Treasure in the electronics factory industry:

1. Large humidification capacity: Each Jinjiale Mist Treasure can atomize 11-1 liters of water per hour.
　　
2. The installation is fast and convenient. Users can easily work with spray as long as they connect the air compressor.
　　
3. The atomizing nozzle is maintenance free, safe, and reliable. The biggest advantage of the air water hybrid humidification system is that its atomizing nozzle automatically removes scale from the air, ensuring that the nozzle is not blocked by scale or other impurities. The lifespan can generally reach more than 10 years.
　　
4. The air-water hybrid humidification system has no water spraying or dripping phenomenon. The nozzle structure ensures that the humidification system will not experience water spraying or dripping during startup, shutdown, and low air pressure.
　　
5. Humidification in clean electronic factories requires softening treatment of water first. Use Jinjiale water softener or pure water machine.
　　


Explanation of Dry Mist Treasure and Aerosol Treasure in the Textile Factory Industry:

　　Moisturizing:Very small droplets of 5-10um can increase humidity without causing beads to form on fibers, equipment, or wall surfaces.
　　
　　Flying flowers:In the process of spray, a large number of negative oxygen ions, neutral and positive charges are generated to eliminate fiber static electricity, thus reducing the phenomenon of flying.
　　
　　Cut off:After the fibers absorb moisture, the intermolecular forces increase, and the elongation increases with the increase of relative humidity, effectively reducing the breakage rate by 34.5%
　　
　　Fury:Increase fiber flexibility and elasticity, reduce weft shrinkage, shorten fabric width, thereby reducing the roughness and unevenness of the fabric surface, which can easily cause defects on site
　　
　　Advantage comparison:
　　
1. High humidification efficiency: The humidification and vaporization efficiency is greater than 99%, which is significantly higher than that of high-pressure micro mist humidificationCentrifugal humidifier.
　　
2. The average investment cost per cubic meter is 8.8 yuan, which is one-third of that of ultrasonic humidifiers; 2/3 of high-pressure micro fog
　　
3. The service life is over 10 years, which is 5 times that of high-pressure mist; It is 10 times that of an ultrasonic humidifier.
　　
　　Performance characteristics:
　　
1. Large humidification capacity: Each Jinjiale Aerosol Treasure can atomize 10 liters of water per hour.
　　
2. The installation is fast and convenient. Users can easily work with spray as long as they connect the air compressor.
　　
The biggest advantage of the air water mixed humidification system is that its atomizing nozzle air will automatically remove scale, ensuring that the nozzle will not be blocked by scale or other impurities. The lifespan can reach more than 10 years.
　　
4. Water spraying and dripping phenomenon. The nozzle structure ensures that the humidification system will not experience water spraying or dripping during startup, shutdown, and low air pressure.
　　
5. There are no special requirements for water quality, and there is no need to install devices for purified or softened water, except for high demand clean environments such as electronic factories.




Product usage case:





Precautions for installation and use of Dry Mist Treasure and Aerosol Treasure:
　　
　　Usage steps:
　　
(1) Ensure the use of clean compressed air and water: The air must be clean, with oil, water, and dust removed, so there must be an air filter at the output air source end of the air compressor. Water should be as pure as possible, so there must be a water filter at the input source of the waterway. When using water with high hardness such as well water, it is recommended to use a water softener or a pure water machine to treat the water source.
　　
(2) Check the sealing of the connections between the air and water pipes to ensure that there is no air or water leakage.
　　
(3) At the beginning of debugging, the solenoid valve in the humidity controller was closed, so it is necessary to set the preset humidity value of the humidity controller to be higher than the actual humidity value in order for the controller to open the solenoid valve.
　　
(4) Ensure sufficient supply of air and liquid: First, turn on the air compressor, and when the air supply source is stable, turn on the main switches of the air and water circuits.
　　
(5) Open the air and water ball valves of all humidifier kits. Check if the pressure gauge pressure is 3 bar
　　
　　Maintenance and upkeep:
　　
1. Regularly inspect and clean filtering equipment such as air filters and water filters to avoid blockages that may affect the supply of air and water. The cycle should be once a month or less.
　　
2. Regularly check whether the water and gas pipelines are blocked by dirt, with a frequency of once a month or less.
　　
3. Regularly use the small tool that comes with the Aerosol Treasure to clean the nozzle hole and the internal filter of its waterway to avoid being blocked by dirt.
　　
　　Precautions for use:
　　
(1) The waterway does not require a liquid pressure control unit. Because water is transported through the siphon principle, only a very low water pressure of 0.5-4 bar is required.
　　
(2) If there is a leak in the nozzle or piping system, or similar hazardous factors may exist, please stop using the humidifier.
　　
(3) Ensure that the water and air pipes are securely connected.
　　
(4) The air pressure is between 1 and 4 bar, the water pressure is between 0.5 and 4 bar, and the pressure resistance of the connecting hose is 5 bar
　　
(5) Do not expose the device directly to sunlight, and do not use it if the ambient temperature is too high or too low. The appropriate ambient temperature range is 1-60 ℃.
　　
(6) Due to the automatic control of humidity, the air compressor needs to be constantly in the on state for operation
　　



Common faults and troubleshooting methods:
　　
　　1. No spray at the nozzle:
　　
(1) Check if the air compressor is supplying air normally, and if the air filter and water filter are clogged.
　　
(2) Check if the gas and water valves are open, if the pipelines are blocked, and if there are any leaks.
　　
(3) Check if the humidifier air and water ball valves are open. Is the internal water inlet filter clogged. Is the nozzle blocked.
　　
　　2. Short spray distance:
　　
(1) Check if the air supply pressure of the air compressor is normal and if the air filter is clogged.
　　
(2) Check if the gas and water pipelines are blocked and if there are any leaks.
　　
(3) Adjust the pressure gauge above the humidifier to a pressure of 3 bar.
　　
　　3. Droplet size issue:
　　
If the fog droplet particles are too small, the pressure gauge can be adjusted to lower the pressure value. If the fog droplet particles are too large, the pressure value on the gas pressure gauge can be increased.