VIP member
Jig F106-1/2/3/4/5 series pull-out adhesion tester
The Jig F106-1/2/3/4/5 series pull-out adhesion tester is easy to use, portable, and has a wide measurement range. The application scope includes: det
Product details
Jig F106-1/2/3/4/5 series pull-out adhesion tester
|
The adhesion measuring instrument provides 5 ranges. Please pay attention to the relevant adhesion values of the instrument before ordering.
|
|||
|
Instrument size
|
Height: 152 mm (6.0 inches)
|
Diameter: 76 mm (3.0 ")
|
|
|
Round forging die size
|
Diameter: 20mm (0.76 ")
|
Area: 314 mm2 (0.5 square inches)
|
|
|
Total weight of the complete set of instruments in the toolbox
|
Range 1, 2, 5:2.1kg (4.7 pounds)
|
Range 3: 3.4kg (7.5 pounds)
|
Range: 4.6kg (8.0 pounds)
|
Model of pull-out adhesion tester
|
model
|
name
|
scope
|
Part Number
|
|
|
N/ mm2(MPa)
|
PSI
|
|||
|
Elcometer106/5
|
Elcometer106Adhesion measuring instrument - range 5
|
（0）-0.2
|
（0）-30
|
F106----5
|
|
Elcometer106/1
|
Elcometer106Adhesion measuring instrument - Range 1
|
（0）-3.5
|
（0）-500
|
F106----1
|
|
Elcometer106/2
|
Elcometer106Adhesion measuring instrument - Range 2
|
（0）-7
|
（0）-1000
|
F106----2
|
|
Elcometer106/3
|
Elcometer106Adhesion measuring instrument - Range 3
|
（0）-15
|
（0）-2000
|
F106----3
|
|
Elcometer106/4
|
Elcometer106Adhesion measuring instrument - Range 4
|
（0）-22
|
（0）-3200
|
F106----4
|
|
Attachment
|
Spare circular forging dies (100 pieces/pack)
|
T1062895-
|
||
|
Large circular forging dies with a diameter of 40mm (5 pieces/pack)
|
T1062914-
|
|||
|
Large pedestal support ring
|
T1062915-
|
|||
|
Epoxy adhesive
|
/span>
|
|||
Pull type adhesion tester
|
Meets the following standards
|
|
|
ANSI N5.12
|
ASTM D 4541
|
|
BS EN 24624
|
ISO 4624
|
|
NF T 30-062
|
|
test method
The Jig F106-1/2/3/4/5 series pull-out adhesion tester uses adhesive to attach the forging die to the coating. 106 applies force and pulls the forging die through internal springs, increasing the pulling force.
When the coating is pulled off the surface, the indicator on the dial will display the value of adhesion, expressed as the force applied per unit area to pull apart the forging die, using the Jig F106-1/2/3/4/5 series pull-out adhesion tester.
The determination of failure types requires inspection of the forging die surface using the Jig F106-1/2/3/4/5 series pull-out adhesion tester.
To provide sensitivity at low values or on uneven surfaces, a 40mm (1.52 ") forging die can be used for the ISO F106-1/2/3/4/5 series pull-out adhesion tester. When using, divide the scale reading by 4.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-