VIP member
Jiangdu Rubber Tensile Testing Machine
It has the function of automatically calculating stress, elongation (with the addition of an extensometer), tensile strength, and elastic modulus, and
Product details
Main features:
Jiangdu Testing MachineWe use imported photoelectric encoders for displacement measurement, and the controller adopts an embedded single-chip microcomputer structure with powerful measurement and control software built-in, integrating measurement, control, calculation, and storage functions. It has the function of automatically calculating stress, elongation (with the addition of an extensometer), tensile strength, and elastic modulus, and automatically calculating the results; Automatically record the force or elongation values of large points, fracture points, and designated points; The experiment process and dynamic display of the test curve are carried out using a computer, and data processing is performed. After the experiment is completed, the curve can be enlarged through a graphic processing module for data reanalysis and editing, and reports can be printed. The product performance has reached the international advanced level.
structural principle
This machine adopts an electromechanical integration design, mainly composed of force sensors, transmitters, microprocessors, load drive mechanisms, computers, and color inkjet printers.
Function: The computer monitor displays the entire test process and curve, and the microcomputer automatically transmits test settings and data. Users can modify the test report according to their own requirements and output standard reports. By analyzing the superposition of grouped experimental curves, quality control parameters can be accurately grasped. The multi-modal data query function can enable managers to clearly grasp the development and changing trends of quality control. Specially designed software features enable testers to quantitatively grasp the state parameters of key points in the application process of test materials, accurately adjust the process and control production.
Jiangdu Testing Machinemaintenance
1. Before the experiment, it is necessary to ensure that the system is preheated for at least 20 minutes to minimize the impact of temperature drift.
2. The buffer oil should be kept clean, and if the oil level is less than two-thirds of the cylinder depth, it should be replaced immediately.
3. Before starting up, check if lubricating oil should be added to the friction moving parts.
4. Before adding the test piece, the brake handle must be stuck and released after adding the test piece.
5. The main bearing of the dynamometer is not allowed to be oiled. The friction wheel surface inside the gearbox must not be oiled or splashed with oil stains. The friction surface should be absolutely clean and the inclined block on the swing arm should not be violently impacted.
6. After the experiment is completed and the power is cut off, clean the surface of the testing machine and provide timely protection.
7. On average, the tensile machine is maintained twice a month.
|
Model number
|
DLD-100
|
DLD-500
|
DLD-1000
|
DLD-2500
|
DLD-5000
|
|
heavy load
|
100N
|
500N
|
1000N
|
2500N
|
5000N
|
|
Scope of application
|
Various materials
|
||||
2.1 Measurement of Large Load (see table above)
2.2 High precision force measurement: 0.1N
2.3 System accuracy: less than 0.5%
2.4 Stretching speed range: 5-500mm/min
2.5 Large stroke of activity gripper: 750mm
2.6 Extension automatic tracking range: 800mm
2.7 Automatic elongation tracking error: ± 1% mm
2.8 Curve Method: Stretching: Force elongation, Stress strain, Strength time; Force time, elongation time, strain time;
2.9 Curve comparison: The curves of the same group of experiments can be overlaid with multiple colors for comparison;
2.10 Local amplification test: Any segment on the curve can be subjected to regional amplification analysis;
2.11 Data analysis: The experimental data on the curve graph can be selected and analyzed at will;
2.12 Automatic Storage: Test conditions, test results, test curves, and data can be automatically stored and accessed at any time;
2.13 Fracture parking: The sample can stop at the moment of fracture;
2.14 Automatic protection: It has automatic overload, overcurrent, overvoltage, undervoltage, overtemperature, upper and lower limit protection;
2.15 Speed Control: Different speeds can be set for moving the crossbeam;
2.16 Manual control: In addition to automatic control, the crossbeam can also be manually operated to change speed up and down, making it more convenient to control the position of the moving crossbeam;
2.17 Printing: capable of processing, storing, printing, drawing curves of experimental data, and printing report forms;
2.18 Zeroing: It can manually or automatically reset load, deformation, and displacement measurements at any time;
2.19 Power supply voltage: AC220V ± 10%
Rated current: 10A
2.20 Dimensions: 650mm x 580mm x 1740mm
2.21 Tsinghua Tongfang brand machine, LCD display, HP printer
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-