Control, color LCD display, can intuitively operate and display the entire process of the experiment;

◆ Simple user interface: Digital computer controls all instrument functions
The standard ASTM D 5001 test program is preloaded into the ABT microprocessor controller: the operator installs the cleaned specimen, adds the fuel sample, and presses the "Start Test" button

◆ Automatic control test sequence: The measurement process does not require operator intervention

◆ Automatic flow controller controls humid and dry air: No need for operator control to adjust the humidity and flow rate of the air

◆ Interchangeable humidity and temperature probes: Humidity and temperature measurements do not require recalibration, simply replace the combined relative humidity and temperature probes with interchangeable pre calibration units

◆ Heating and cooling system: Peltier heating and cooling system

A digital microscope equipped with an image acquisition system and software

◆ All parameters: motor speed, test time, fuel temperature, air temperature, humidity data, etc. are directly displayed

◆ Ultrasonic cleaner;

Model KD-R0687
Sample volume: 50 ± 1.0 mL
Sample temperature: 25 ± 1 ℃
Fluid environment temperature:+5.0~+35.00 ℃
Air with adjusted temperature and humidity: The relative humidity at 25 ± 1 ℃ is 10 ± 0.2%
Air flow rate entering the sample: 0.5l/min
Sample surface air flow rate Sample surface air flow rate 3.3l/min
Sample pretreatment time: 15 minutes
When measuring, the surface air flow velocity of the sample is 3.8 L/min
External load: 1000 grams (500g weight) (± 1g)
Drum speed: 240 ± 0.5 rpm
Testing time: 30 ± 0.1 minutes
Data collection and analysis: motor speed, fuel temperature, air temperature, humidity, and testing time.
Test Ring Test Ring: Dia 49.25 to 49.10, Thk 13.11 to 13 (SAE 8720 Steel, Hardness 58 to 62 Rc, surface finish Rq 0.51 to 0.71 micron).
Test ball: 12.7mm (0.5 inch) (AISI 52100 Steel, Hardness 64 to 66 Rc)
Power supply: 230V AC, single-phase, 5A
Sample volume: 50 ± 1.0 mL