Japan KURABO Fluorinated Solvent Bottle Washing PFA Bottle Washing

1、 Product Introduction:

Fluorine based materials, due to their chemical resistance, corrosion resistance, strong acid and alkali resistance, can be used to make high-purity liquid medicine containers. In environments with strong alkali, such as semiconductors, optoelectronics, and chemical industries Wait, its temperature resistance is about 150 ℃~200 ℃.

KURABO has a leak proof design on the bottle cap, ensuring high safety. The bottle cap adopts a plug free design, which belongs to integrated molding and has excellent air tightness. Strong chemical resistance and corrosion resistance, capable of holding organic solvents such as strong acids and alkalis.

Its advantages include good heat resistance and weather resistance, excellent release performance, low residue of substances, low precipitation, good transparency, and good sealing, making it very suitable for storing high-purity chemical drugs. Compared to glass products, PFA bottles can better preserve drugs intact without contamination and have higher safety. Therefore, it is widely used in the chemical industry, medical industry, semiconductor industry, etc.

2、 Product Features:

1. Suitable for producing corrosion-resistant parts, wear-resistant parts, seals, insulation parts, and medical device components

2. High temperature wire and cable insulation layer, anti-corrosion equipment, sealing materials, pump valve bushings, chemical containers, molding performance

3. Crystalline material with low moisture absorption. It can be processed into products using the usual processing methods for thermoplastic materials

4. Poor fluidity and easy decomposition, producing corrosive gases during decomposition. It is advisable to strictly control the molding temperature not to exceed 475 degrees, and the mold should be heated to 150-200 degrees. The pouring system should have low resistance to material flow

5. Translucent granules, injection molding, extrusion molding. The molding temperature is between 350 and 400 degrees Celsius, and temperatures above 475 degrees Celsius can easily cause discoloration or bubble formation. Also note that demolding may be difficult

3、 Product model: