1、 Overview

JXFL3088The transmitter host is equipped with a standardSType Pitot Tube can measure the flow rate and velocity of high-temperature flue gas

2、 Functional Features

1Stainless steel pitot tube temperature resistance (850 ℃), standard transmitter host: LCD display, zero position adjustable on site, full degree adjustable on site.

2Good stability, with long-term stability of up to 1% FS/year at full and zero positions. The host has a temperature drift of less than 1% FS within the compensation temperature range of 0-70 ℃, and less than 1% FS within the entire allowable operating temperature range.

3Equipped with reverse protection and current limiting protection circuits, the transmitter will not be damaged if the positive and negative poles are reversed during installation. In case of abnormalities, the transmitter will automatically limit the current to within 35mA.

4Solid state structure, no movable parts, high reliability, long service life.

5Easy to install, simple structure, economical and durable.

3、 Main technical parameters

4、 Wiring

5、 Installation diagram

Pay attention to the front and back of the probe5Double diameter straight pipe section

5、 Button Description

M: Selection and Confirmation >: Move cursor ∧: Change data

Menu Description:

Long press the M key for 4 seconds, enter password 11, and enter the menu

1:Mode -1- Display Wind Speed

2--Display air volume

3--Simultaneous display of wind speed and air volume

2: Pipeline area input

3: Coefficient (used to adjust the current value)

4Output -1- Upper limit alarm

2--Lower limit alarm

3--Damping adjustment

4--mail address

6、 External dimensions

5、 Selection of Pitot Tube

SType Pitot Tube Pitot Tube Coefficient 0.83~0.86

Pitot tube is a customized product: flange size, thread size, and probe length can all be customized, and special specifications can be customized according to needs based on drawings