Detailed information on JOFRA CTC-155A constant temperature bath

JOFRA CTC-155AConstant temperature bath; 8398-3899 provided by Shenzhen Yinfei Electronic Technology in stockJOFRA CTC-155AThe price, parameter specifications, model pictures, brand/trademark, inventory, etc. of constant temperature bath products are gathered by dry body furnace Yinfei Electronics, which is a national supplier, purchaser, and manufacturer of Ametek temperature calibrators. We provide you with AMETEK hereJOFRA CTC-155AThermostatic bath. As the first level "distributor and seller" of Ametek temperature calibrators in China, Yinfei thanks you for your cooperation. We have prepared a large amount of stock for users to choose from. Below are detailed parameters, specifications, and other information.

A classic work of industrial dry furnace

The new CTC dry body furnace has improved accuracy by 25%, with a resolution of 0.01 ° C. It is the most accurate and popular industrial dry body furnace in the market

Optional external standard platinum resistor

The C-type dry furnace has a measurement interface with an external standard platinum resistor, which further improves the accuracy of the dry furnace The newly developed external standard platinum resistance series sensor is suitable for the new CTC.

A wider temperature range

The new CTC series covers a temperature range of -25 to 660 ° C (-13 to 1220 ° F) It basically covers the calibration needs of general industries.

CTC-155: -25 to 155°C (-13 to 311°F)

CTC-350: 28 to 350°C (82 to 662°F)

CTC-660: 28 to 660°C (82 to 1220°F)

External standard platinum resistance temperature control

CTC with external standard platinum resistance can operate in two modes, with the "External ref" mode representing the reading of the external standard platinum resistance as the standard value. In the "Set follows True" mode, an external standard platinum resistor has two purposes: to measure temperature as a standard value and to control the CTC dry body furnace to reach the set temperature.

Quick calibration

All Jofra dry body furnaces are equipped with specially designed temperature controllers, which enable faster heating and cooling, as well as shorter stabilization times Performing a three-point temperature calibration only requires a short amount of time.

portable

The CTC series can be used on-site and indoors, and our focus on size and weight design makes CTC highly portable CTC is lightweight, easy to carry, and has a handle that is far away from the heating area.

The CTC series integrates many useful features - it can be operated in four modes.

set temperature

The simplest and fastest temperature setting method is to press F1 (set) to set the desired target temperature.

Preset Temperature

Under the preset temperature menu (press F2), you can select several preset temperature values. These preset temperature values can be edited according to requirements.

Automatic switch test

After setting the parameters, the dry furnace will automatically run, and the data can be recorded after the test is completed. You can set whether dead zone testing is required by yourself, and the dry furnace can automatically repeat the operation up to three times.

Automatic stepping

Under the automatic stepping function, up to 12 temperature points can be set, and the dwell time can also be set. Even stability criteria can be set Just start running, the dry furnace can automatically run all processes.

Special performance

Simultaneous calibration of multiple sensors

For most dry furnaces, the loss of heat from the casing is a challenge when calibrating larger sensors or multiple sensors. The advanced feedback algorithm of CTC combined with external standard platinum resistors effectively solves the problem of heat dissipation and improves calibration accuracy.

Plug and play external standard platinum resistor

The STS series external standard platinum resistor matched with the CTC series C-type dry body furnace has plug and play function, and the relevant parameters are stored in the chip in the interface, including the coefficient, serial number, temperature range, calibration date, calibration cycle, etc. of the platinum resistor.

Multiple types of casing

The CTC series offers a variety of casing options, covering almost all calibrated sensor sizes. The new CTC low-temperature dry furnace provides a 35% larger sleeve than the previous generation product for calibrating the calibrated sensor. We also offer porous sleeves with multiple commonly used sensor sizes for greater flexibility in use.

IRI - Intelligent Recalibration Information

When starting up or connecting an external standard platinum resistor, the new CTC will check if the calibration has expired. If it has expired, it will immediately emit a sound and warning message The validity period of calibration can be set to 1-99 months.

External standard platinum resistance protection function

If the set temperature value is outside the range of the external standard platinum resistor, CTC will be locked to avoid damaging the standard platinum resistor.

User defined settings

Quiet mode

CTC can operate in quiet mode and is suitable for use in laboratories or offices. In this mode, CTC does not cool at full speed.

Online firmware upgrade

You can download and upgrade software on the platform, and also register products here. When there are new software available for download or other useful information, you will be notified.

sensor bracket

The sensor bracket can be installed on CTC to fix the position of the calibrated sensor The bracket includes support rods, fixators, and fixtures.

Portable case

Specially designed portable cases can provide excellent protection for CTC. The portable case can also store accessories such as sleeves, test wires, manuals, etc.

For more detailed tester information, you can enter "1001718" in the Baidu input box and press Enter to enter Silver Fly for viewing. This product is supplied by Shenzhen Yinfei Electronic Technology Co., Ltd., Hong. Address: Room 2217, Building A, Saige Qunxing Plaza, Huaqiang North, Futian District, Shenzhen.