Main purpose:The JCFJ series internal grading mechanical crusher is the latest generation of ultrafine mechanical crushing equipment developed by our company in combination with advanced technologies at home and abroad. The machine is equipped with an efficient worm gear classifier, which can timely separate the qualified fine powder after crushing, quickly discharge it outside the machine, and avoid "over crushing". It can not only produce ultrafine powder, but also have narrow particle size distribution, high uniformity, easy control of particle shape, good product dispersion, and can be widely used in industries such as chemical, metallurgical, mining, energy, electronics, pharmaceuticals, pesticides, plastics, papermaking, pigments, coatings, dyes, abrasives, food, cosmetics, etc. It can perform dry crushing and grading operations on various organic and inorganic substances.

working principle:The main mechanism of the JCFJ series internal grading mechanical crusher consists of a crushing chamber component composed of an impact hammer block and a lining plate fixed on the outer circumference of the crushing turntable. It is connected to the drive motor through a transmission belt and horizontally installed on the frame; The middle of the crushing chamber is equipped with an intake pipe; The grading chamber components consisting of the worm gear classifier and exhaust pipe are placed above the crushing chamber cylinder; The grading chamber and exhaust pipe end face are equipped with gas seal isolation to prevent coarse powder from entering the finished product. There is gas seal protection in front of the rotor rolling bearing to prevent fine powder from entering the rolling bearing. The entire device is simple and compact. When crushing, the material to be crushed is uniformly sent to the grading chamber by the feeding device, where it is pre graded. The qualified particles in the raw material are classified and discharged from the exhaust pipe, while the coarse particles enter the crushing chamber and are crushed under the high-speed impact and grinding action of the impact hammer block. The crushed material is transported to the worm gear classifier for pre grading under the upward airflow entering through the intake pipe. The qualified particles are classified and discharged from the exhaust pipe along with the exhaust gas before being collected as products. The coarse particles return to the crushing chamber again for further crushing. The product collection section consists of a cyclone separator, a pulse dust collector, and a centrifugal fan, which collect qualified crushed products.

Product features:The most significant feature of this machine is its pre grading and inspection grading functions. Qualified particles in the raw materials are directly discharged after grading, which helps to improve crushing efficiency and reduce energy consumption. This machine has high crushing efficiency, low energy consumption, and minimal wear. It can crush high hardness materials and products with narrow particle size distribution. Particle size adjustment is extremely convenient, and it is easy to operate and fully enclosed. It has excellent pollution resistance, a wide range of applications, stable equipment operation, and safe and reliable operation.