The irregular contour floating chamfering knife arc deburring tool has the following characteristics:

1. It can overcome the shortcomings of 3D software and avoid the tedious process of writing 3D programs. After cutting, irregular shapes can be chamfered by simply following the contour.

2. No need to run the Z-axis;

3. Save time and reduce mechanical wear and tear;

4. Suitable for curved and irregularly shaped workpieces;

5. The up and down floating range is completed in one go within 10mm;

The front-end grinding tool can be replaced by customers, with ER11 cylinder clamp and standard clamping range of 6mm spring chuck. You can replace different specifications of cutting heads according to your actual needs, suitable for processing different products. The product allows a rotational speed of 5000-8000rpm, and customers can adjust it according to the different machining centers and materials to achieve the desired machining effect.

The purpose of deburring and chamfering is achieved by continuously squeezing and cutting the edge of the workpiece being processed. The axial floating deburring tool has a floating range of 10mm in the axial direction, which is used to remove contour burrs with height changes or burrs on the surface of the hole. When using, set the Z-axis position of the tool so that the grinding tool is 1-2mm below the surface point of the workpiece (pre pressing amount), and then the tool can automatically compensate in the height direction, thereby achieving the goal of removing burrs on irregular height surfaces.

By using the ER11 chuck, the diameter of the cutting roller blade handle can be clamped from 0.5mm to 7mm;

Has a floating range of 10mm up and down;

Compensation capability; Can be raised by 10mm;

Rotate in the same direction as the machining direction;

Clockwise rotation speed: 5000-8000r/min;

Feed rate: F2000-4000mm/min；

Through the floating mechanism of the tool, this floating deburring and chamfering tool can move along the uneven edges of the workpiece for processing,The up and down floating pressure can be adjusted through the mechanism inside the tool holder, and the tool can be directly driven by the machine tool and machining center spindle or used on a powered robotic arm.

Scan the QR code on Taobao mobile phone to purchase directly