Transmet I.S. is an all-in-one dew point transmitter that is easy to install and used to measure the moisture content in flammable or ordinary gases. Its special design is suitable for hazardous environments. Under the stainless steel casing, the sealing protection level of Transmet I.S. reaches IP66 (NEMA 4X). The range of this transmitter is -100~+20 ° C dew point, with an accuracy of 1 ° C dew point, which is the maximum accuracy that a typical dew point transmitter can provide. Transmet I.S. has a fast response speed and provides users with real-time continuous measurements. Transmet I.S. is set up and verified before leaving the factory, and users can immediately install and operate it upon receipt without the need for additional settings or verification work. highlight ATEX, FM&CSA certification Wide range Verification range -100~+20 ° C dew point Excellent accuracy ± 1.0 ° C quick response Maximum pressure resistance 30 MPa (300 barg) Durable IP66 (NEMA 4) enclosure protection
technical indicators
Sensor thread 5/8 'UNF Parallel shell stainless steel Sealing protection level IP66 (NEMA 4X) power supply 10 ~ 28 V DC Reverse polarity protection output Current: Simulate 0-20 mA or 4-20 mA selection, linearly corresponding to ° C dew point Humidity range -Dew point at 100~+20 ° C precision ± 1 ° C+20~-59.9 ° C dew point ± 2 ° C -60~-100 ° C dew point ± 0.3 ° C temperature resolution 0.1 ° C-80~+20 ° C dew point Dew point at 1 ° C -100~-80 ° C 0.1 ° C temperature Operating Temperature -20 ~ +60°C storage -40 ~ +70°C work pressure Maximum 30 MPa traffic 0-10 Nl/min gas flow rate 20m/sec¹ (最大) Selection of safety barriers System 1: Zener safety barrier (must have a grounding system) System 2: Isolated safety barrier (no need for common ground) Options: Sensor sampling sleeve, display unit (Cermet II I.S.), power module Simultaneously providing multiple sampling systems