Product Features

·International standard HEAD installation appearance, Φ44mmX22.5mm
·LED/LCD rotatable meter head, internationally original
·Input/output isolation voltage 2KV
·HW192 overlay Hart protocol
·Power supply mode: 24V AC/DC
·Intelligent programmable: Input RTD, TC, mV, Ω, output 4... 20mA
·Programming interface: USB or Hart protocol configuration

●Basic Parameters

Output signal: Analog 4-20mA
Supply voltage: U=7.5V~45V
Load: Max. (V power supply -7.5V)/0.0208A (current output)
Alarm current: Below the measurement upper limit, the output drops to 3.8mA
Above the measurement limit, the output rises to 20.8mA
Sensor damage; Sensor open circuit (excluding thermocouple TC), output is 3.8mA
Input current: ≤ 3.8mA
Current limit: ≤ 20.8mA
Environmental temperature: -40 to+85 ℃
Storage temperature: -40 to+100 ℃
Protection level: IP00, IP66 (installation)
Cold end compensation: Built in cold end compensation
Operation method: Adjust online through PC programming or manual controller
Accuracy level: ≤ 0.2K or 0.08%
Electrical isolation: 2KV
Measurement variables: temperature (temperature linear transfer), resistance, and voltage
Measurement range: The variation of the transmitter's measurement range depends on the sensor
Connection mode and input signal
Voltage influence: negligible
Environmental temperature impact: negligible (temperature drift)
Condensation: allowed
Seismic resistance: 4g/2-150Hz
Installation angle: unlimited