1、 Product Overview

◎ Valve assembly: straight ball valve, three-way ball valve, butterfly valve

Rated voltage: AC230/110/24V, DC24V

◎ Control feedback method: RS485 (Modbus), CANBus 2.0B

◎ Can achieve: two position mode, three position mode

High performance brushless motor with built-in overload protection

◎ With a lifespan of up to 20000 cycles

◎ Two or more actuators can be used in parallel (※ RS485 maximum parallel 32, CANBus 110)

2、 Product Features

Adopting a 1.3-inch OLED large screen LCD with no viewing angle limitation, high brightness, energy saving and environmental protection, real-time display of valve opening and external control commands, automatically entering sleep mode after about 5 minutes, and prompting position status and control commands during sleep.

△ Unique no opening valve adjustment mode: the intelligent bus type is the same as the intelligent switch type valve adjustment.

Adopting a 16 bit high-performance CPU, a 12 bit high-precision AD conversion chip, and a built-in unique algorithm, it completely eliminates hysteresis and achieves precise opening and closing of valves, especially suitable for three-way valves.

Adopting non-contact positioning, modular design of the control unit, and encapsulation treatment ensures the reliable operation of components, greatly improving the service life of the product; The interface adopts standard connectors, which are easy to install, debug, and replace.

Real time fault menu prompt (including faults caused by actuator jamming or other reasons resulting in actuator switch not being in place), and can output fault alarm signals.

The bus ID address and baud rate can be dynamically changed through the menu.

△ Remote control and on-site control can be automatically switched through the menu, and valve opening and closing can be achieved through buttons.

△ Through the menu, the valve closing position can be shifted towards the opening or closing direction, greatly reducing the complexity and inconvenience of on-site adjustment caused by "ordinary switch type mechanical positioning".

The opening and closing speed of the valve can be adjusted in real-time through the menu.

The system can be reset to factory settings through key operations.

3、 Product selection

High speed series