Introduction to tuning fork densitometer:

The tuning fork densitometer is a high-precision and highly adaptable vibration principle densitometer produced by introducing the most advanced frequency tracking technology from abroad. The product design adopts plug-in installation and is widely used for medium density detection in pipelines, open tank containers, and closed tank containers.
The tuning fork densitometer sensor is composed of two piezoelectric crystals, one of which generates vibration and the other detects vibration. The tuning fork sensor is equipped with a temperature sensor to compensate for the vibration of the piezoelectric crystal.

Technical parameters of tuning fork densitometer:

• Measurement range: 0~3 g/cm ³, optional
• Output: 4-20mA signal (4-wire system)
• Accuracy: 0.3% (real-time range) or 0.001 g/cm ³, whichever is greater.
• Resolution: 0.0001 g/cm ³
• Installation method: DN50, DN80, DN100 and threaded installation (threaded installation with mounting base)
• Applicable range: -30~120 degrees
• Maximum working pressure: 20MPa
• Protection level: IP65
• Fork material: Stainless steel 316, Hastelloy C22, Manganese alloy 400
• Fork coating: Teflon coating (perfect hydrophobicity and non adhesion to impurities in liquids)

• Measurement of slime density (concentration) during coal conveying measurement of slurry density (concentration) during mineral processing;
• Measurement of syrup density (concentration)
• Measurement of density (concentration) (dry matter mass) of starch lotion
• Measurement and alarm of lime slurry density (concentration) in desulfurization projects
• Measurement of Ammonia Density (Concentration) in Denitrification Projects
• Measurement of Density (Concentration) of Concentrated Solutions in the Pharmaceutical Industry
• Measurement of alcohol and water surface density (concentration)
• Measurement of density (concentration) of various types of conveying pipelines or tanks