VIP member
Industrial measuring powder and viscous liquid reflective probe with an outer diameter of 1/2 inch
This probe is particularly suitable for industrial applications that require reflection measurements of powders and viscous liquids. The cylindrical b
Product details
Industrial measuring powder and viscous liquid reflective probe with an outer diameter of 1/2 inch
This probe is particularly suitable for industrial applications that require reflection measurements of powders and viscous liquids. The cylindrical body and probe end made of stainless steel material can withstand various harsh environments, and the probe end can be waterproof and easily replaced. The probe end can also be made of PEEK or Hastelloy C276 material.
The light from the illumination source can be coupled into a fiber bundle consisting of six optical fibers through a standard SMA905 connector, and directly transmitted to the end of the probe, and then illuminated by a 45 ° quartz window to illuminate the tested sample material. This angle can avoid the normal reflection of the window. The reflected light of the tested powder or liquid enters the 7th optical fiber and then enters the spectrometer through its SMA905 connector at the end.
technical data
| Fiber bundle | 7 200 μ m optical fibers, including 6 illumination fibers and 1 detection fiber, N. A.=0.22. Standard length 2 m |
| wavelength range | 200-2500 nm (UV/VIS/NIR) |
| joint | SMA-905 connector (2x) |
| Probe tip | Stainless steel cylinder, 120 mm (length) x 12.7 mm (1/2 inch diameter). The probe end includes a sapphire window approximately 10 mm (diameter) x 1 mm (thickness), which is replaceable and waterproof. Optional - PK (PEEK material) or - HY (Hastelloy C276 material) |
| Light conduit | The optical fiber is protected by a silicone inner tube and a flexible stainless steel (BX, outer diameter 6.0mm) or chrome plated brass (ME, outer diameter 5.0mm) outer tube. Sleeves can also reduce the pressure on optical fibers. |
| operation temperature | -40°C to 100°C. (HT version 200 ° C) |
| pressure | Probe tip 10 bar @ 25 ° C |
| bending radius | Bending radius: short time (a few seconds) 20 mm, long time: 120 mm |
ordering information
| FCR-7UVIR200-2-45-IND | 1/2 "inch outer diameter reflective probe for measuring powders and viscous liquids |
| FCR-TIP45 | Spare 1/2 "probe tip with sapphire window, suitable for UV/IR/NIR spectral range |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-