Product Introduction：

The Tekway series industrial switches adopt FPGA and CPLD dynamic reconstruction and repetitive programming technology, designed with good electromagnetic compatibility and shock resistance. Since being put into the market in 2011, they have been reliably applied in harsh environments such as petrochemicals, railways, highways, high-speed railways, environmental protection, and mining;

1)TekwayThe series of industrial switches adopts FPGA and CPLD dynamic reconstruction and repetitive programming technology, designed with good electromagnetic compatibility and shock resistance. Since its launch in the market in 2011, it has been reliably applied in harsh environments such as petrochemicals, railways, highways, high-speed railways, environmental protection, and mining;

2)Tekway series industrial switches adopt One Chip technology

Technical solution, all models are based on non blocking 24 * 100M+2 * 1000MThe line speed switching chip has a backplane bandwidth of 8.8Gbps, and all products are achieved by releasing the corresponding number of ports on the same One Chip switching chip, ensuring that mid to high end models have high-end processing capabilities and excellent performance, eliminating packet loss or delay caused by insufficient switching capacity or backplane bandwidth reservation for different models, making the series of products more suitable for high traffic and low latency industrial applications.

43)One Power of Tekway series industrial switches

5The design concept is that the entire product line adopts industrial grade isolated power supplies with a peak power of up to 25W (the actual power consumption of the entire series of products is between 5W-10W), ensuring sufficient margin for power output. Even in extremely harsh -40 ° C cold or+75 ° C hot environments, it can maintain long-term operation (with 50% output margin even in extreme power supply derating), greatly extending the service life of the power supply and the overall stability and reliability of the equipment.)

1Sinking gold process. The entire product line adopts denser and more uniform Den GoldThe immersion gold process makes welding more secure, with better oxidation and corrosion resistance, and can be used stably in harsh environments. Meanwhile, Den-Gold

The gold deposition process makes it possible to deposit large areas of gold, thereby achieving electromagnetic protection for key chips, and the entire product line has better anti-interference and electromagnetic compatibility.

)

Tekway series industrial switches use Al Alloy

The spray resistant aluminum alloy shell has excellent heat dissipation performance, corrosion-resistant and oxidation resistant aluminum alloy shell does not rust, and conducts heat quickly. The joints inside the casing are covered with single-sided tape during painting to ensure that the casing has transparent conductivity during overall assembly.

Main performance:

)

The circuit board adopts immersion gold technology and complies with IPC standards. The key components adopt industrial wide temperature crystal oscillators and fully imported capacitors;

3)

Isolated power supply (88-300VDC or 90-264VAC), or DC redundant input isolated power supply (18-60VDC), with dual instantaneous voltage suppression tubes used for port protection;

4) Provide a relay alarm output port (250VAC or 125VDC, 2A@250VAC perhaps 2A@30VDC )；

5) Electromagnetic compatibility meets the industrial level four standard;

6) Built in Link Fault Pass Through, Link Loss Forwarding, Far End

Fault and other TS1000v2 fault detection functions;

7) The network management mode supports SNMP, WEB, and RESET, and supports MRP ring network media redundancy protocol (IEC62439-2);

8) The shell is treated with anti-corrosion conductive oxidation, and the fully sealed single rib aluminum alloy integrated structure.

Network managed industrial grade switch:

Industrial switches are applied in harsh environments, forming various topologies such as star and ring, and the operation status of equipment is particularly important. Therefore, the management of network equipment is indispensable.

The network management interface of TEKWAY industrial products includes the following modules: system management, port management, VLAN configuration, QoS configuration, security, redundancy protection, link aggregation, backup/restore, other configurations, and exit.

Web-based

The network administrator can only configure and manage a single device, and the special envoy is for the topology structure of the group ring network. The WEB network administrator cannot locate network faults, which is a major flaw (some manufacturers' WEB can only achieve simple configuration and cannot display the operating status of remote devices, so the "network administrator" basically loses its meaning).

TW NetTime is a set of devices that can be managed for our company's network equipment, and can also achieve unified management for network equipment of companies such as CISCO and other types of network hosts. More importantly, it can achieve real-time monitoring of the entire network status, allowing administrators to truly achieve centralized management of the entire local area network.

basic function

1) Topology discovery, identifying specified network segments and hosts, accurately locating devices, and separately listing faulty devices in the fault view for easy management.

2)

Support real-time monitoring of network events and network alerts. Notification templates can be configured, and network events or alarms with severity levels specified by designated devices can be notified to designated personnel through email, SMS, and other means. Notification templates are convenient and flexible. Sound/graphic notification of alarm3) Support performance traffic monitoring for SNMP devices, specifying port traffic monitoring.

4) Statistical analysis of network alarm events is conducted through tables, bar charts, and pie charts, which is intuitive and clear.

5) Supports ping, trace route, telnet for general devices, MIB browsing, routing table, interface table, TCP/UDP table, IpNetToMedia table for SNMP devices. Support WEB configuration management for devices, panel.

6) Support multi-user decentralized management.

Automatic topology discovery

Port status and configuration

port status

Broadcast Storm Control

VLAN settings

Redundant protection configuration

802.3af/at)

Performance characteristics：

● RFC 1994 PPP Challenge Handshake Authen-ticationProtocol (CHAP)

● RFC 2597 DiffServ Assured Forwarding

RFC 3140 PHB Identification Codes PHB Identity Codes

Exchange rate: 148800 pps/100Mbps port1488000 PPS/Gigabit port

Frame