Industrial PH electrodeTechnical instructions:

PH sensor

Liquid receiving material: Universal type: Ryton body (with glass inside)

Insertion type: PVDF body (Kynar)

Measurement range: 0-14pH

Temperature range: 0-85 ℃

Slope: ≥ 96%

Accuracy:<0.1 pH

Zero point potential: E₀=7PH±0.3

Pressure range: 00~6.5 bar at 100 ℃

Flow velocity range: 0-2m/s, non abrasive fluid

ORP sensor

Liquid receiving material: Universal type: Ryton body (with glass inside)

Insertion type: PVDF body (Kynar)

Measurement range: -2000 to+2000 mV

Temperature range: 0-85 ℃

Accuracy: ± 20mV limited to standard solution only

Pressure range: 00~6.5 bar at 100 ℃

Flow velocity range: 0-2m/s, non abrasive fluid

Industrial PH electrodeOrdering Guide:

The following is the ordering information for commonly used pH/ORP probes. If you have special requirements, please callSANBONcompany

PH 406-1PUniversal sewage pH probe with 5-meter cable

PH 406-1CUniversal pure water pH probe with 5-meter cable

PH 406-1TUniversal pH probe with 5-meter cable, resistant to hydrofluoric acid

PH 406-1RUniversal ORP probe with 5-meter cable and platinum electrode

PH 406-1PMIndustrial flat pH electrode with 5-meter cable, temperature compensation optional (used in industries with severe desulfurization and pollution)

SANBEN 3/4There are various materials and installation methods for inch composite pH/ORP batteries, which can be applied to various environments that require pH and ORP measurement, such as measuring acidic substances, alkaline substances, alcohol, carbon compounds, lipids, ketones, desulfurization, and other chemicals; Especially suitable for harsh environments such as municipal wastewater and industrial wastewater that require frequent replacement of sensors.

Features and advantages:

★ Most pH and ORP analyzers are compatible

★ useMolecular polymer filling, reference junction potential is very stable

★ selfDynamic temperature compensation

★ Specially designed for special applications

★ No need to supplement dielectric, low maintenance required

The sensor body is made of Ryton or PVDF material that is resistant to chemical corrosion

★ High measurement accuracy, fast response, and good repeatability

★ Ag/AgCL reference electrode for silver ions

★ The sensor has a sturdy circular electrodeEasy to clean flat electrodes and electrodes resistant to HF (hydrofluoric acid)

★ The dual salt bridge design of the reference electrode extends the service life of the sensor. In addition, the electrode has a built-in solution grounding

★ Extremely using high-quality low-noise cables, the signal output length can be greater than 40 meters without interference

Universal sensor

The universal sensor body is made of Ryton material, with three-quarters inch NPT threads on both ends. The sensor can be directly installed in a standard three-quarters tee pipe as a flow-through installation or fixed at the end of a pipe as a submerged installation. Three way | Immersion installation components come in various materials to meet different application scenarios.

plug-in sensor

The plug-in sensor has a relatively long, unthreaded PVDF material body with a sealing ring, which is connected toSANBENPlug in installation components provide a sealing effect when used together. The insertion and extraction of electrodes into pipelines or containers do not require interruption of the process flow.

PH 406-1T antimony electrode

Antimony electrode is a type of metal oxide electrode, where the common electrode potential is generated at the interface between the metal and the oxide covering its surface, hence it is also known as a metal oxide electrode. It uses calomel electrode as the reference electrode and metal antimony as the measuring electrode. The potential difference between metal antimony and the solution is determined by the hydrogen ion activity in the solution, that is, the concentration of the solutionpHValue. Main applications andIndustries that are resistant to hydrofluoric acid liquids, such as steel plants.

PH 406-1PM planar electrode

Using imported glass sensitive film, the material is burned at a high temperature of 1300 degrees, manufactured with special technology. The special material ball cannon is used as a flat surface, with strong anti pollution and easy clarity. The shell is made of polytetrafluoroethylene material, which has high temperature resistance, corrosion resistance, acid and alkali resistance. Mainly used for measuring flat objects, pH measurement in soil, and industries with high pollution.