Product Introduction

Brief introduction

Carbon and sulfur have important effects on the chemical, physical, and mechanical properties of steel and cast iron, so ferroalloy materials have specific requirements for their contentImported carbon sulfur analyzerG5 Crius HF achieves precise and rapid analysis of ppm level carbon and sulfur content in solid samples, especially metal materials. Its principle is to place the solid sample in a ceramic crucible and introduce it into a high-frequency induction furnace for combustion in the presence of oxygen gas flow. The power of the high-frequency furnace can be adjusted to achieve the best combustion effect. The CO2 and SO2 gases produced by combustion are detected by a high-sensitivity and selective solid-state infrared detector, and the detection results are automatically analyzed by a computer.

IIAXSImported carbon sulfur analyzermain features

1. Advanced high-frequency induction furnace technology, equipped with high-power and long-life electronic tubes, providing a 3-year warranty service.

2. Innovative combustion method design and side blowing oxygen technology: effectively reducing the deposition of combustion residues in quartz combustion tubes, extending the life of combustion tubes, and increasing maintenance intervals.

3. Design of direct observation window for combustion area: It can directly observe the entire combustion process and evaluate the effectiveness of sample analysis.

4. Fully automatic cleaning device: a reliable automatic furnace head cleaning device that automatically collects dust in the waste crucible and throws it away together with the crucible, without the need for manual cleaning.

5. Optimized oxygen supply method design, dynamic flow control, effectively reducing analysis time and improving sample efficiency.

6. Electronic pressure and flow monitoring

7. Selective solid-state infrared detector, electronic frequency control, with a 3-year warranty.

8. User friendly analysis software.

IIIParameters

1. Analysis time: less than 40 seconds, depending on the material properties and weight of the sample;

2. Power: analyzer 500VA; External device 2.3KVA;

3. Carrier gas: Oxygen 99.999%, 2Bar;

4. Compressed air: dry, 6bars;

5. Size: 554 × 600 × 475mm;

6. Power supply: 230V, 2.7KVA.