Impedance analyzer IM7580s: equivalent circuit analysis function

It is possible to infer the constants of five equivalent circuit modes based on measurement results. Moreover, the ideal value of frequency characteristics can be displayed through simulation function, using speculative results or any constant. In addition, using the comparator function can also determine whether the measurement result is within the judgment area.

Impedance analyzer IM7580 series: LCR measurement using SMD fixture IM9201

The measurement frequencies of the IM7580 series 5 models cover 1MHz to 3GHz.
Combined with the testing fixture IM9201 for 6 sizes of SMD, it can measure samples simply and accurately.

Impedance analyzer IM7580 series: Area determination function

In the comparator function of the analysis mode, it can determine whether the measured value has entered any set judgment area. The "zone determination function" is to set the range of upper and lower limits and display the determination result in IN/NG.

Impedance analyzer IM7580 series: peak determination function

In the comparator function of the analysis mode, it can determine whether the measured value has entered any set judgment area.
The "peak determination function" sets the range based on the above limit, lower limit, left limit, and right limit, and displays whether the measured peak is within the determination area in IN/NG.

Impedance analyzer IM7580 series: SPOT determination function

In the comparator function of the analysis mode, it can determine whether the measured value has entered any set judgment area.
The "SPOT determination function" selects any scanning point and parameter, and can determine up to 16 points.

Impedance analyzer IM7580 series: comparator function

By using the comparator function, it is possible to determine whether the measured value has entered any set judgment area.
Applicable to the function of determining whether the sample is qualified.

Impedance Analyzer IM7580 Series: Contact Check Function

By using the contact inspection function, it is possible to check the contact status between the sample and the measuring port, and confirm the poor contact and connection status.

Impedance analyzer IM7580 series: connection method of test head

Connect the connection wire of the test head to the impedance analyzer.
Slightly bend the handle of the torque wrench and tighten the nut (0.56 N · m).
Please be careful not to twist it too far.

Precision calculation software

Simply input numerical values to easily calculate accuracy.

Impedance analyzer accuracy calculation software, please click