The hydraulic brake blades produced are mainly suitable for natural rubber, synthetic rubber, and other plastic materials. They use double-sided cutting edge steel cutting tools, high-pressure oil pump cylinders, and steel plate splicing crossbeams for shearing. This machine mainly consists of a rubber cutter, a frame, a working oil cylinder, a base, an auxiliary worktable hydraulic system, an electrical system, and other parts. When cutting rubber, manually place the rubber material under the rubber cutting knife, and then press the start button. The rubber cutting knife will fall down along the slide driven by the piston rod to cut the rubber material.
Mainly suitable for cutting and cutting materials, cutting the vast majority of non-metallic materials such as rubber and plastic. This machine mainly consists of a rubber cutter, a frame, a working oil cylinder, a base, an auxiliary worktable, a hydraulic system, an electrical system, and other parts. A nylon pad is installed on the base below the rubber cutter to protect its blade. When cutting raw rubber, manually place the rubber material under the rubber cutter, and then press the start button. The rubber cutter will be driven by the piston rod to fall down along the slide on the frame and cut the rubber material. There are two upper and lower limit switches installed on the rack to control the directional valve to change the movement direction of the rubber cutter, and also to protect the piston cylinder head.