Product Introduction

Horiba portable gloss meter from Horiba, JapanIG-331 Technical Parameters:

IG331 Gloss Meter

Optical system: incidence angle of 60 °/reception angle of 60 °
Measurement range: 0-100.0 (resolution 0.1)
Reproducibility: ± 5% F.S., within ± 1 digit
Display range: 0~199.9
Tested area: 12 × 16mm elliptical shape
Light source: LED, wavelength 880nm
Receiver: SPD, high-precision silicon photodetector
Light source lifespan: Half * *
Calibration method: automatic calibration, attached calibration standard film
Power supply: One 9V (S-006p) dry battery
Temperature range for use: 0-40 ℃
Dimensions mm: 78 * 189 * 58 (W * H * D); Weight 400 grams (including battery)
Other functions: low power alarm, button confirmation sound, automatic/manual shutdown, out of range alarm

Horiba portable gloss meter from Horiba, JapanFunctional features:

1.60 ° measurement angle
2. Accuracy ± 0.5% F.S., resolution 0.1
3. Mean calculation function
4.99 sets of numerical memory
5. Automatic shutdown and automatic calibration function

HORIBA Glossmeter IG-331 Features:

The measurement angle can be switched between 60 °/20 °. A separation type that improves work efficiency.
The measuring department is separated from the main display section, so it can provide high work efficiency and safety in any location.

Calibration can be performed with just one operation.
As long as the calibration button on the main body is pressed, calibration can be automatically performed in sequence.

The measurement angle can be switched between 60 °/20 °.
The measurement angle can be switched between 60 °/20 °. The measurement angle of 60 ° is widely used, while the measurement angle of 20 ° is more suitable for measuring surfaces with glossiness exceeding 70 when measuring with 60 °. It can also measure objects with high glossiness.

IG-331 Technical Parameters:

optical system

60 ° measurement: incident angle of 60 °? Detection angle 60 °
20 ° measurement: incidence angle of 20 °? Detection angle 20 °

Measure area

60 ° measurement: 3 × 6mm ellipse
20 ° measurement: 3 × 4mm ellipse

light source
LED (wavelength 890nm)
Light source lifespan
Half*
Detector
SPD (silicon photodiode)
Measurement range
0-100

Display Range

0-199 (decomposition degree 1)

repeatability

Within ± 5% F.S. ± 1 digit

power supply

Single 3-type dry battery (R6P) x 4 pieces

Continuous usable time

More than 50 hours

Temperature range for use

10?40℃

size

Subject: 140 (W) × 75 (H) × 34 (D) mm
Optical system: 88 (W) × 30 (H) × 45 (D) mm

quality

About 350g (when the battery is built-in)

additional function

Automatic correction
Automatic shutdown
Display Hold
Out of range display
Battery residual display

Note: The 20 ° measurement of IG-331 is used when measuring objects with a glossiness of 70 or above using a 60 ° measurement.
spare parts
Protective cover (with calibration standard board)