Introduction to High Temperature Constant Temperature and Humidity Environmental Chamber

This high-temperature constant temperature and humidity environmental chamber is a non-standard customized model, suitable for material testing machines. This high-temperature constant temperature and humidity environmental chamber requires a high temperature of 250 ℃, which is much higher than the traditional environmental testing chamber's high temperature requirement of 150 ℃. The evaporator of the refrigeration and dehumidification system cannot accept high temperatures above 150 ℃ and must be protected.

1. Temperature range: -20~200 ℃, humidity range: 20~98% RH;

Common temperature and humidity points: 25 ℃, 50% RH; 85 ℃, 85% RH; 150 ℃.

2. Temperature index: fluctuation ± 1 ℃, gradient: 2 ℃; Deviation: ± 2 ℃;

3. Humidity deviation: ± 5% RH (<75% RH); ± 3% RH (≥ 75% RH)

4. Studio: 240 × 200 × 700, D × W × H, mm;

5. Dimensions: 2300 × 360 × 860, D × W × H, mm;

6. The front part is the test box, and the rear part is the unit and water tank (sliding on the rack, with specially designed track sliding wheels);

7. Test box upper and lower slider aperture: 50mm;

8. Temperature and humidity control system: touch screen control system TEMI880;

9. Standard heating power: 1KW (used within a temperature range of 100 ℃, for constant temperature and humidity)

10. Additional fast heating power: 1KW (used when the temperature range is above 100 ℃);

11. Refrigeration and dehumidification unit: Italian "Aspala" single unit air-cooled unit; Constant temperature and humidity environmental chamber