Product Introduction:
High temperature and high pressure sandwich pot, used for rapid aging of food at high temperatures, flavoring and other purposes, with a reasonable structure, excellent manufacturing, high degree of continuity, mechanization and automation, and high safety factor and hygiene requirements. The bottom scraping adopts a self weight type, which ensures close contact between the pot body and the mixing blades, making the material evenly mixed and inseparable.

scope of application
High temperature and high pressure sandwich pot, widely used in hot pot ingredients, various sauces, food fillings, and central kitchens. It is mainly used in lotus paste, fruit paste, bean paste, jujube paste, sauce, ass hide glue, curry conditioning food, daily chemical industry, pharmaceutical industry and other industries.

Specification parameters:
Manipulation form: button manipulation
Voltage: 380V
Rated power: 50HZ
Rated heating power: 45kw
Mixing power: 1.5kw
Flip power: 1.5kw
Inner diameter of frying pan: 1200mm
Inner pot thickness: 5mm
Outer diameter of frying pan: 1400mm
Fry pan depth: 600mm
texture of material: SUS304
Dimensions: 2400mm2200mm1900mm

Product features:
The mixing form adopts a special inclined transmission system, and the planetary agitator used in the electromagnetic frying pan fully contacts the pot body, maintaining an integer transmission ratio between the rotation and revolution of the transmission system, so that there are no mixing dead corners in the pot.
High temperature and high pressure sandwich pot, similar to manual stir frying techniques, can maintain automated and continuous production of sauces, powders, vegetables, and seasonings.
Independently developed SUS304 high-frequency coil, which can reach high temperature in a short period of time and lower the temperature in a short period of time, making the material fully achieve the effect of "frying" and "stir frying"
Temperature control automation can easily control the temperature, save energy and protect the environment, operate in a closed process, have no secondary pollution, fast cooling speed, and even material errors

matters needing attention:
1. Strictly prepare in advance according to the inspection standards.
2. Check whether the electrical circuits are complete, whether the joints are safe and secure, whether the wires are matched, and whether everything is complete and correct before powering on for heating.
3. Before starting up, check the amount of heat transfer oil added, which should be 8 centimeters below the filling port.
4. During the normal selection process, the two oil inlet ports on the upper edge of the pot should not be blocked after adding oil, and should be opened for heating and selection. After each day's operation, the electric heating power must be turned off.
5. Operators are not allowed to operate with water, and stop the operation when there is oil leakage outside.