Mainly used for drilling aluminum alloy doors, windows, and curtain wall profiles, especially suitable for long and large-scale production.
Suitable for profiles with a cross-section not exceeding 200 * 200mm, with a processing length of up to 6000mm.
Equipped with seven sets of drilling heads to meet the simultaneous processing of multiple groups of holes.
The feed adopts a cylinder with damping cylinder, which has fast forward and working feed functions.
Adopting Omron control system, it can achieve single machine head independent processing and any machine head linkage processing.
The machine head can be manually adjusted along the X, Y, and Z axes, and is equipped with a scale for simple and convenient adjustment. The Z-axis is guided by a linear slider, which increases the load-bearing capacity, guidance accuracy, and service life by several times.
Adopting a spindle motor with a built-in spring chuck, the tool clamping force is increased, the operation is smoother, the drilling force is greater, and the drilling effect is better.

Power supply 380V 50Hz
Power 11kW
Air pressure 0.5~0.8Mpa
Gas consumption 50L/min
Motor power 7 × 1.5kw 3000r/min
Maximum drilling diameter 16mm
The maximum distance between two boreholes is 6000mm
The minimum distance between each set of holes is 300mm
Number of power heads 7
The forward and backward movement distance of the drill bit is 120mm
Drill bit feed stroke 125mm
The upward and downward movement distance of the power head is 100mm
Workbench dimensions (length x width) 300 x 300mm
The maximum cross-sectional size of processed profiles is 200 × 200mm
Dimensions (length x width x height) 6500 x 1300 x 1700mm
Weight 1300kg