VIP member
Product details
High blending system
It is composed of a horizontally rotating container and rotating vertical mixing blades. When mixing the formed material, the container turns left and the blades turn right. Due to the reverse flow effect, the movement directions of the particles of the formed material intersect, increasing the chances of mutual contact. The reverse flow mixer has low extrusion pressure on the material, low heat generation, high mixing efficiency, and relatively uniform mixing.
On this basis, an improved plow board mixer has emerged. The material pot in its structure is basically the same as the countercurrent type, but the stirring blade is changed to a fixed plow plate. Only the material pot rotates, and there are two sets of plow plates. One set flips the material outward, and the other set flips the material inward. The mixing process continuously separates and flips the material. To achieve the purpose of mixing. The equipment has good mixing quality and easy operation.
1. The machinery should be placed in a ventilated position to ensure the heat dissipation of the motor and extend its lifespan.
2. Regularly check if the belt is loose by moving the motor outward until the belt is tightened.
3. Regularly add butter to the bearings to ensure lubrication between them.
4. If any faults are found during mechanical operation, the machine must be shut down and the power supply disconnected before handling.
5. Before running the machine, check whether the screws of the slurry blades in the bucket are loose. If they are loose, tighten them.
6. Do not mix tools, hard objects, or strips into the bucket.
It is composed of a horizontally rotating container and rotating vertical mixing blades. When mixing the formed material, the container turns left and the blades turn right. Due to the reverse flow effect, the movement directions of the particles of the formed material intersect, increasing the chances of mutual contact. The reverse flow mixer has low extrusion pressure on the material, low heat generation, high mixing efficiency, and relatively uniform mixing.
On this basis, an improved plow board mixer has emerged. The material pot in its structure is basically the same as the countercurrent type, but the stirring blade is changed to a fixed plow plate. Only the material pot rotates, and there are two sets of plow plates. One set flips the material outward, and the other set flips the material inward. The mixing process continuously separates and flips the material. To achieve the purpose of mixing. The equipment has good mixing quality and easy operation.
1. The machinery should be placed in a ventilated position to ensure the heat dissipation of the motor and extend its lifespan.
2. Regularly check if the belt is loose by moving the motor outward until the belt is tightened.
3. Regularly add butter to the bearings to ensure lubrication between them.
4. If any faults are found during mechanical operation, the machine must be shut down and the power supply disconnected before handling.
5. Before running the machine, check whether the screws of the slurry blades in the bucket are loose. If they are loose, tighten them.
6. Do not mix tools, hard objects, or strips into the bucket.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-