1、 Overview:

The KY8000A5000N series servo controlled material testing machine is suitable for testing the mechanical properties of metal and non-metal materials, such as tension, compression, ring stiffness, flatness, bending, shear, tearing, peeling, and puncture. It can also perform automatic control tests for constant velocity loading, constant velocity deformation, and constant velocity displacement, and has the functions of low cycle load cycle, deformation cycle, and displacement cycle. Calculate indicators such as elongation, tensile strength, flexural modulus, elastic modulus, yield strength, net energy, flexural energy, and total energy.

Using PC for data processing and analysis, the experimental results can be automatically saved. After the experiment is completed, the experimental curve can be retrieved again, and the experimental process can be reproduced through curve traversal, or curve comparison and amplification can be performed. The experimental software on Windows and Visit platforms has strong data and graphics processing capabilities, and can print complete experimental reports and curves in real time.



2、 Execution standards:

GB/T16491-1996 Electronic universal testing machines, etc;

This machine can handle curve categories: load V.S. displacement

Load V.S. Time

Displacement V.S. time

Stress V.S. Strain

Load V.S. two-point extension

3、 Technical parameters of tensile testing machine:

1. Load element: 0-100KN (optional interval);

2. Test force measurement range: 0.4% to 100% FS

3. Power resolution: 1/300000;

4. Power accuracy: ≤ 0.3%;

5. Power amplification factor: 7-segment automatic switching;

6. System accuracy: ≤ 0.5%;

7. Displacement resolution: 1/100000;

8. Displacement accuracy: ≤ 0.5%;

9. Speed range: 0.001-500mm/min (special testing speeds can also be customized according to customer needs);

10. Walking space: 900mm (excluding clamps, special walking spaces can also be customized according to customer needs);

11. Effective space: 400mm (special test width can also be customized according to customer needs);

12. Power supply: Φ 220V 50HZ;

13. Servo motor power: 600W;

4、 Technical parameters of low-temperature refrigeration control system:

1. Temperature range: -40~150 ℃;

2. Volatility: ≤± 2.0 ℃;

3. Temperature gradient: ≤± 1.5 ℃

4. Temperature control range: customized according to customer requirements, Min -30 ℃~Max. 100 ℃

5. Control mode: P.I.D. automatic temperature calculation

6. Humidity range: 2% RH~98% RH

7. Control stability: ± 2.5% RH, ± 1 ℃

8. Distribution uniformity: ± 3% RH, ± 1 ℃

9. Heating method: Hot air circulation heating

10. Cooling compressor: compressor cooling

11. Cooling rate>1 ℃/Min

12. Timer: LED, 0-9999 hours and 99 minutes

13. Inner box material: SUS # 304, mirror stainless steel plate

14. Inner box size: (L × W × H) 33 × 31 × 50cm (customizable)

15. Outer box material: Sandgrain stainless steel plate, aluminum double column tensile machine, advanced baking paint (for long-term consideration, stainless steel material is currently selected)

16. Insulation layer: high-density hard PU foam adhesive and 24K glass wool

17. Safety device for high and low temperature tensile testing machine:
18. Travel protection: dual protection of mechanical and computer to prevent exceeding the preset travel distance
19. Quantity protection: can be set by the system
20. Emergency stop device: capable of handling sudden situations
21. Temperature Overrise Preventer: protects the test sample and test chamber
22. High speed circuit protector: protects the heating circuit
23. Electric motor (blower, freezer): Overload thermal relay (protects blower, freezer from overload)
24. High pressure protection switch for refrigerant: protects the compressor and extends its service life
25. Circuit breaker protector: protects the compressor and extends its service life
26. Compressor overload protection switch, ultra-high temperature overload protection switch, water shortage protection device