High and low temperature closed flash point testersummary:

This instrument is designed and manufactured in accordance with the requirements of the national standard GB/T5208 "Determination of Flash Point - Rapid Equilibrium Closed Cup Method", and applies the equilibrium closed cup method to test the flash point properties of liquid samples. Suitable for testing the flash point of various paints, safety products, paints, adhesives, solvents, fatty acid methyl esters (FAME), chemical reagents, petroleum and related products with a closed cup flash point in the range of 0 ℃ to 100 ℃.

This instrument also meets the requirements of ISO 1523 and ISO 3679 standards. This instrument is easy to operate, accurate in detection, and intuitive in display. It is an ideal substitute for imported instruments and can meet the needs of petroleum, chemical, coatings, paints, railways, aviation, electricity, and commercial inspection

And scientific research institutions have a fast closed flash point for petroleum products.

High and low temperature closed flash point testerTechnical Parameter：

1. Working power supply: AC220V ± 10% 50Hz

2. Detection range: 0-100 ℃ (customizable -30 ℃ -50 ℃)

3. Temperature control accuracy: ± 0.5 ℃

4. Display mode: LCD touch screen display

5. Ignition method: manual ignition, gas flame

6. Cooling method: Peltier effect technology (external cold water circulation)

7. Sample dosage: 2ml~4ml

8. Power consumption of the whole machine: not exceeding 300W

9. Testing method: NANMAC imported sensor from the United States

10. Dimensions: 410 × 290 × 310 mm

Characteristics of high and low temperature closed flash point tester:

1. The design and manufacturing comply with the requirements of GB/T5208 "Determination of Flash Point - Rapid Equilibrium Closed Cup Method".

2. Adopting high-definition touch screen display and imported PID control unit temperature control system, temperature testing is reliable and accurate.

3. The instrument has a small volume and adopts advanced Peltier effect technology, with fast cooling speed and fast thermal equilibrium speed.

4. The amount of test sample is small, only 2-4 ml is required for each injection. Solid or semi-solid samples require 4 ml for each injection

5. In addition to manual ignition, the testing process automatically maintains a constant temperature, detects the flash point, locks and prints the test results.

6. Automatic atmospheric pressure correction calculation, what you see is the experimental result obtained. Equipped with a micro printer that can print test results.

Thank you very much for choosing the SC series products from Changsha Sichen Instrument Technology Co., Ltd. From this moment on, we will accompany you in all aspects of our service to meet your needs.
We adhere to the service goal of "satisfying customers" and regard your recognition as a source of pride and joy of success, as well as a good opportunity to continue our trust and recognition.