English

Shenzhen Shangyoutai Technology Co., Ltd
Home>Products>Hetai PH-101N with imported PH electrode set - PH meter
Hetai PH-101N with imported PH electrode set - PH meter
The Hetai PH-101N is equipped with a complete set of imported pH electrodes. The Hetai PH instrument is a pH value online monitoring panel instrument,
Product details

The entire set of PH electrodes comes standard with original packaging. Electrode brand: BROADLEY-JAMES brand, model E-3055-EC1-M10FF. The new Hetai PH meter instrument has been shortened by 47mm for easier installation in the electrical box, reducing the installation space in the electrical box and lowering the overall cost of the electrical cabinet. Please read the instructions carefully before using the HeTai PH-101N. To make the measurement more accurate, the instrument needs to calibrate the electrodes regularly. The shelf life of glass PH electrodes is one year. After one year from the factory, their performance will be affected regardless of whether they are used or not, and they should be replaced in a timely manner. hardPH electrode used or pH that has been discontinued for a long timeThe electrode must be used before use3mol/L KCLSoak in solution24h。

The electrode used in the analysis of the Hetai PH-101N instrument comes from BJC company in the United States. It is currently one of the industrial pH electrodes with a wide variety of high-quality electrodes in Europe and America, and can be applied to various occasions such as wastewater tanks and fermentation tanks. The controller produced by our company is a high impedance input type, which can be applied to any brand of industrial pH electrode.

Model

PH/ORP-101N

PH/ORP-102N

Range

PH:0-14pH

ORP:-1000mV+1000mV

Resolution

0.01pH

1mV

Accuracy

0.01pH±1digit

1mV±1digit

Impedance

>1012Ω

TemperatureCompensation

ATC probe or Manual Fixed Resistance

Display

3 1/2 0.8'LCD

Current Output

420mA Max. load 1KΩ

Control Action

Relay ON/OFF

Current On Contact

220VAC Max.3A/110VAC Max.1.5A

Control Limit

Hi/Lo

Hi Hi/Lo Lo

Set Point

2

4

Relay Output

2

4

Power

110V220V AC±12%50/60Hz

Cut out Dimension

135mm×135mm×135mmH×W×D

Weights

1.8Kg

1.85Kg


Hetai PH-101N with imported PH electrode setMaintenance and precautions:

1. The input terminal (measuring electrode socket) of PH-101N instrument must be kept dry and clean to prevent dust and water vapor from entering.2Avoid immersing the electrode in protein solution and acidic fluoride solution for a long time, and avoid contact with organic silicone oil.3After long-term use of the electrode, if the slope slightly decreases, the lower end of the electrode can be soaked in water4HFIn solution (hydrofluoric acid)35Second, then rinse with distilled water and use again0.1mol/LSoak in hydrochloric acid to renew the electrode.4To make the measurement more accurate, it is necessary to calibrate the electrodes regularly and clean them with distilled water.



Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!