freedomApplication of drop testing machine:

The single arm drop testing machine is used to test the damage of product packaging caused by falling, and to evaluate the impact resistance during transportation and handling. The applicable standard is ISO2248 JISZ0202-87 GB/T4857.5-92

freedomCharacteristics of drop testing machine:

The drop testing machine can perform free drop tests on the surface, corners, and edges of packaging, equipped with a digital height display instrument and a decoder for height tracking, so as to provide the product's drop height accurately, with an error of no more than 2% or 10MM from the preset drop height. The machine adopts a single arm double column structure, with electric reset, electric drop, and electric lifting devices, making it easy to use; The unique buffering device greatly improves the service life, stability, and safety of the machine. The single arm setup allows for easy placement of products.

freedomMain technical parameters of the drop testing machine:

freedomEnvironmental requirements for drop testing machine workshop：

Temperature: 5 ℃~+28 ℃ [1] (average temperature within 24 hours ≤ 28 ℃)

Relative humidity: ≤ 85% RH

Power supply conditions: three-phase four wire+protective earth wire

Voltage range: AC (380 ± 38) V

Allowable frequency fluctuation range: (50 ± 0.5) Hz

The grounding resistance of the protective grounding wire should be less than 4 Ω. Users are required to configure corresponding capacity air or power switches for the equipment at the installation site, and this switch must be independently used for the equipment