Equipment name: Hammer type whirlwind mill (fully automatic)

Instrument model: JXFM110


Hammer whirlwind millPerformance characteristics:
1. The sample is crushed into powder by a high-speed grinding hammer at 16800r/min and enters the stainless steel integrator through a stainless steel sieve plate with high-speed airflow to produce the required uniform sample;
2. The sound absorbing and insulating materials inside the box have lower noise levels than similar products outside;
3. The motor is equipped with a temperature control protection circuit, which will automatically shut down once the motor exceeds the set temperature;
4. During sample crushing, it has the function of high-speed airflow automatic cleaning and grinding chamber, without the need to stop manual cleaning during sample crushing;
5. Irregular shaped large particle samples (such as large particle corn) must be pre crushed by laboratory grinding or feed feeding for crushing;
6. The high-speed airflow during the hammering and crushing process can cause the loss of moisture in the sample. Generally, samples containing 10-20% moisture will lose 5-10% of their moisture during the crushing process.

Hammer whirlwind millTechnical Description:

1Certification is used for the detection of drop number method and gluten index methodsample preparationmethod;

2Sample uniformityOkay, okay,Improved the repeatability and accuracy of analysis results；

3boxBuilt in soundproofing material, low noise, effectively avoiding noisyLaboratory environment;

4Equipped with a cyclone separation outlet for convenient sample collection and automaticClean the grinding machine and crush the next sample directly without cleaning;

5Automatic feeding, which can be based on the moisture content of the feed and whether it has a shellAdjusting the feeding speed with other factors can effectively improve the grinding efficiency and effectiveness;

6Closed design, high safety;

7Multi functional grinding mill, capable of grinding various samples，suitable forgrainsOilseedsand otherssample

8. Power supply: 220V AC 50HZ 800W

9. Hammer speed: 16800r/min

10. Grinding capacity: 300g sample/50s

11. Sieve plate aperture (mm): 0.5, 0.8, 1.5mm

12. Grinding fineness:100%Full pass710MmAperture sieve, passed through510Mm≥95%，pass210MmAperture sieve ≤80%；

13. Residual amount in grinding chamber: ≤2.0g(水分≤14%)

14. Sound insulation system: working noise ≤75dB；

15. Dust collection bag design, no dust loss.;

16. The air conditioner adjusts the feeding speed to reduce material blockage during the grinding process;

17. Secure the safety door to prevent injury to personnel;

18. Can be crushed in one go200—300 Take samples to ensure obtaining representative samples

19. Stainless steel containers are easy to take and place, sturdy and durable.