Caliber range: DN1~DN50;

Valve body material: stainless steel/cast steel

Control mode: normally closed/normally open

Power supply voltage: DC12-2220V/AC24-380V;

Applicable media: gases and liquids, etc;

Pressure range: 0.01-10MPa;

Temperature range: 0 to+80; Connection method: thread/flange

Scope of use of solenoid valve:

This series of solenoid valves is suitable for pipeline control systems that are submerged in water or easily submerged in water; Widely used in fields such as landscape fountains, shipbuilding industry, petrochemicals, water supply and drainage, cleaning equipment, water plants, pipeline media automation control, etc.

Characteristics of solenoid valve:

1. CNC machining to ensure the accuracy and reliability of solenoid valves; Free directional installation on site;

2Rapid action response; The valve body adopts precision casting technology and has a beautiful appearance;

3Liquid and gas can be mixed for use, increasing the range of valve usage；

4Imported sealing materials with good sealing performance;

5Stainless steel piston structure, stable performance, improves valve reliability, and has a service life of over 1 million actions;

6. Autocratic coil, not easy to burn; Special coils can be installed at a depth of 1000 meters underwater.

Working principle of fountain solenoid valve:

Normally closed type: When the coil is energized, the pilot valve core is engaged, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve is opened；

WhenWhen the coil is powered off, the valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston throttle hole and the thrust of the reset spring, and the valve is closed.

Normally open type: When the coil is energized, the pilot hole closes, and the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, causing the solenoid valve to close.

When the coil is powered off, the valve core is reset by the spring, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve opens.

When the outlet pressure is greater than the inlet pressure, the medium will conduct in the opposite direction; Can install check valves or customize valves with built-in check function.

Note: The external dimensions are informed according to the pressure level, and special requirements can be customized.

If the outlet pressure is greater than the inlet pressure, the medium will conduct in reverse. Can install check valves or customize valves with built-in check function.