VIP member
HY-4D speed regulating multipurpose oscillator
HY-4D speed regulating multipurpose oscillator
Product details
| Horizontal oscillator |
|
HY-4Dspeed regulationIntroduction to Multi purpose Oscillators
1HY-4DThe function of the speed adjustable multi-purpose oscillator: It is widely used in laboratories of various colleges and universities, environmental protection, scientific research, health, epidemic prevention, petroleum, chemical and other units. It has the characteristics of generous appearance, large capacity, low noise, light weight, small size, adjustable speed, and is equipped with a timing device. It is an ideal and essential tool for laboratory workers.
2： Parameters of speed regulating multi-purpose oscillator:
1Power Supply: AC220V 50Hz
2Motor power:100W 3: Stepless speed regulation: Operating frequency:0300 revolutions per minute/divide 4Oscillation amplitude: reciprocating40mm 5: Timing:0-120minute
6: With（A）ForDisplay speedwithoutATo not display speed
7: Working size:400*400mm
Capacity:3000mlFlask or other containerX4Only the fixture is3000mlFixed stainless steel fixture
3： Usage of speed regulating multi-purpose oscillator:
1:Firstly, move the container that needs to be oscillated(bottle)Put it into the oscillation plate spring, and the solution in the container cannot exceed one-third of the container, otherwise it must be plugged.
2:Check the timer knob and turn it onON(normally open)Location or the time location you need to specify. 3:Turn the speed control knob counterclockwise to the lowest speed position, turn on the power switch, the power indicator light will turn on, and then turn the speed control knob clockwise to the speed you need.
4： Precautions for speed regulating multi-purpose oscillators:
1This multi-purpose speed regulating oscillator uses a three eye safety socket, and must be properly grounded when in use.
2When working, the machine should be placed on a flat and sturdy tabletop to prevent vibration. 3The clamp spring is only used for fixing small and medium-sized bottles, and for extra large containers, several springs should be removed or reinforced in other ways. 4After use, the power of this machine should be turned off, placed in a dry and ventilated place, and kept clean. |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-