VIP member
Product details
Product IntroductionProduct Introduction
Using a variable ratio bridge to measure the transformation ratio of a transformer is cumbersome to operate and has a narrow measurement range, which is no longer suitable for the fast-paced and high-efficiency requirements of modern measurement. Therefore, a new generation of transformer ratio tester has been developed using modern electronic technology. It has a small volume, light weight, high precision, and good stability. It adopts a large screen Chinese character display, menu operation, and user-friendly interface. The variable ratio group can be tested in one go. The transformer ratio tester is an ideal testing instrument for the power industry sector.
Product nickname: Transformer Ratio Group Tester, Transformer Ratio Tester, Transformer Ratio Fully Automatic Tester, Fully Automatic Transformer Ratio Tester, Transformer Ratio Group Measuring Instrument, Transformer Ratio Measuring Instrument, Transformer Ratio Fully Automatic Measuring Instrument
Product parametersProduct Parameters
Technical Parameter
| Ratio Measure Range | 1~10000 |
| group | From 1 to 12 o'clock |
| accuracy | 1-1000 0.2 level |
| 1000~10000 Level 0.5 | |
| power supply | AC220V ±10%，50Hz |
| Environmental temperature for use | -5℃～40℃ |
| Environmental humidity for use | ＜85% |
| volume | 430×320×215mm3 |
| weight | 8kg |
Note:
1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued.
2. To learn more about Huatian products, please enter the product center. Service Hotline: 400-8855-448
Product FeaturesProduct Characteristics
-
1. The transformer ratio tester can automatically measure the wiring group
-
2. Automatically perform group changes
-
3. Automatically switch phase sequence
-
4. Automatic range switching
-
5. Automatic calibration table
-
6. After inputting the standard transformation ratio, the relative error can be automatically calculated
-
7. Once the measurement is completed, the test voltage will be automatically cut off
-
8. Set data, automatically save measurement results, and view previous data
-
9. Measure the on load transformer and input the transformation ratio only once
Product videoProduct Video
Product AtlasProduct Picture
Product Attachment Diagram
Instrument host
TEST
TEST
printing paper
fuse
power line
Instruction manual, certificate of conformity, inspection report
Product detail diagram
appearance
front
panel
screen
printer
key
power supply
Communication line interface
low-voltage connection pole
High tension terminal
attachment box
Production process diagram
On site production drawing 1
On site production drawing 2
On site production drawing 3
On site production drawing 4
product certificateProduct Certificate
Our company's products are strictly produced in accordance with international and national standards and industry regulations. They have passed the testing of national, provincial, and municipal power research institutes, measurement centers, and authoritative power departments, and have fully passed the ISO9001 international quality management system certification, the People's Republic of China manufacturing measuring instrument license, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, and GB/T45001-2020 occupational health and safety management system requirements.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-