Baitong Plastic IndustryPECarbon single wall spiral tubeHDPEcable sleevePECable sheathPECable protection conduit

Product Introduction:

Carbon threaded conduit, abbreviated as carbon pipe, is a cable conduit produced and formed mainly from high-density polyethylene and modified carbon. Its appearance is black single-walled spiral, so it is also known as“Carbon threaded pipe”“Single wall carbon pipe”.

Product features:
1Good flexibility: The product has a special threaded shape that can bend freely around obstacles, making it convenient for construction.
2Single length: The length of a single piece is determined by the user at will to reduce the number of connection ports, making construction faster and maintenance easier.
3Lightweight: Compared to cement short pipes, fixed length cast iron pipes, steel pipes, and fixed length pipesPVCLightweight and easy to move.
4High strength: The special threaded physical shape of the product gives it high compressive strength and will not deform under heavy pressure underground.
5Corrosion resistance: The product has excellent acid, salt, and alkaline resistance, and its service life can reach up to50Years or more.
6Safety: The product has strong impact resistance]Flexibility and high strength make it safe even in the event of earthquakes or ground subsidence.
7Convenient threading: The inner and outer surfaces of the product are smooth, with a low friction coefficient. The tube is equipped with lead wires, making threading very convenient.
8Low construction cost: Taking into account the above advantages, it has the advantages of fast construction, short construction period, few interfaces, and high economic benefits.

PEApplication scope of carbon single-walled spiral pipe:

Urban streetlight line buried engineering, electrified railway power, communication cable laying buried engineering, highway power, communication facility construction and renovation engineering, residential community construction engineering, and buried cable engineering for parks and large entertainment venues.

Baitong Plastic Industry Main specifications of carbon pipes:

Φ40、Φ50、Φ65、Φ80、Φ100、Φ125、Φ150、Φ175、Φ200etc.

Baitong Plastic IndustryPEConstruction method of carbon pipe:

1The selection of the diameter of the carbon threaded sleeve is based on the outer diameter of the cable, allowable voltage, current, and other engineering conditions.

2Excavation of engineering trenches shall be carried out in accordance with relevant department regulations and user requirements, and the width and depth shall be determined based on the number of cables laid. The distance between the single-walled carbon pipe and the ditch is50mmThe distance between pipes is30mm.

3The laying of carbon threaded pipes: After placing the carbon pipe into the trench, the curved areas must be sealed with cement to prevent entanglement or compression. At the connection between the two casing pipes, the casing pipe heads must be fixed with bricks and cement.

4When connecting two single-walled carbon pipes with carbon threaded protective sleeves, first screw the joint to one end of the connected pipe, and then invert it to the other end of the connected pipePVCWrap the sealing tape around it.

5After laying the carbon threaded casing according to the requirements, backfill with the original soil from the trench excavation and compact the backfill soil.